background image

ENGLISH

3

 How to use the M MODE button

If you press M MODE, the unit goes into functions 
mode, then the number buttons and 

 

¢

/

4

 

 

buttons work as different function buttons.

Ex.:  When number button 2 works as 

MO (monaural) button.

To use these buttons for their original functions 
again after pressing M MODE,

 wait for 5 seconds 

without pressing any of these buttons until the 
functions mode is cleared or press M MODE again.

 Detaching the control panel

 Attaching the control panel

CONTENTS

Control panel ..................................   4

Remote controller — 

RM-RK50

 ...........   5

Getting started ................................   6

Basic operations ...................................................  6

Radio operations .............................   7

Disc operations ................................   8

Playing a disc in the unit  .....................................  8

Sound adjustments ..........................  10

General settings — PSM ..................  11

Maintenance ...................................  13

More about this unit ........................  14

Troubleshooting ..............................  16

Specifications ..................................  17

For safety...

•  Do not raise the volume level too much, as this will 

block outside sounds, making driving dangerous.

•  Stop the car before performing any complicated 

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold 
weather, wait until the temperature in the car becomes 
normal before operating the unit.

EN02-07_KD-G335[U_UH]1.indd   3

EN02-07_KD-G335[U_UH]1.indd   3

8/30/06   5:22:03 PM

8/30/06   5:22:03 PM

Summary of Contents for KD-G335























Reviews: