JVC KD-G255 Instructions Manual Download Page 2

Page: 2 / 34

ENGLISH

*Temperature inside the car....

If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.

BEFORE USE
*For safety....

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

How to reset your unit

While holding SEL (select), press

(standby/on attenuator) for more than 2 seconds.

This will reset the built-in microcomputer.

Notes:

• Your preset adjustments—such as preset channels or sound adjustments—will also be erased.
• If a disc is in the unit, it will eject when you reset the unit. Be careful not to drop the disc.

SEL (select)

(standby/on attenuator)

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2.

CAUTION:

Do not open the top cover. There are no user serviceable parts inside the unit; leave all

servicing to qualified service personnel.

CAUTION:

Visible and invisible laser radiation when open and interlock failed or defeated. Avoid

direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

EN02-03_KD-G255[U]f.p65

12/24/03, 12:38 PM

Summary of Contents for KD-G255



































Search results

Summary of Contents for KD-G255

Reviews:

Related manuals for KD-G255

Brands by name

Popular brands

JVC KD-G255, Instructions Manual

Search results

Summary of Contents for KD-G255

Reviews:

Related manuals for KD-G255

Brands by name

Popular brands