background image

12

ENGLISH

Indications

Item

(       : Initial)

Selectable settings, [reference page]

DEMO

Display demonstration

• 

DEMO ON

• 

DEMO OFF

:  The display demonstration will be activated automatically if no 

operation is done for about 20 seconds, [6].

:  Cancels.

CLK DISP 

*

1

Clock display

• 

ON

• 

OFF

:  The clock time is shown on the display at all times when the power 

is turned off.

:  Cancels; pressing DISP will show the clock time for about 5 seconds 

when the power is turned off, [6].

CLOCK H

Hour adjustment

1 – 12

[Initial: 1 (1:00)], [6]

CLOCK M

Minute adjustment

00 – 59

[Initial: 00 (1:00)], [6]

DIMMER

Dimmer

• 

ON

• 

OFF

:  Dims the display and button illumination.
:  Cancels.

SCROLL 

*

2

Scroll

• 

ONCE

• 

AUTO

• 

OFF

:  Scrolls the displayed information once.
:  Repeats scrolling (at 5-second intervals).
:  Cancels.
•  Pressing DISP for more than one second can scroll the display 

regardless of the setting.

AUX ADJ

Auxiliary input level 
adjustment

A.ADJ 00 
– A.ADJ 05

:  Adjust the auxiliary input level to avoid the sudden increase of the 

output level when changing the source from external component 
connected to the AUX input jack on the control panel.

TAG DISP 

*

3

Tag display

• 

TAG ON

• 

TAG OFF

:  Shows the Tag information while playing MP3/WMA tracks, [9].
:   Cancels.

AMP GAIN

Amplifier gain control

• 

LOW PWR

• 

HIGH PWR

:  VOL 00 – VOL 30 (Select this if the maximum power of the speaker 

is less than 50 W to avoid damaging the speaker.)

:  VOL 00 – VOL 50

*

1

  If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “OFF” 

that you save the car’s battery.

*

2

  Some characters or symbols will not be shown correctly (or will be blanked) on the display.

*

3

  For KD-G396/KD-G395.

EN08-13_KD-G396[U_UH]f.indd   12

EN08-13_KD-G396[U_UH]f.indd   12

8/21/07   4:33:18 PM

8/21/07   4:33:18 PM

Summary of Contents for KD-G245























Reviews: