background image

18

ENGLISH

Symptoms

Causes

Remedies

General

•  Sound cannot be heard 

from the speakers.

The volume level is set to 
the minimum level.

Adjust it to the optimum 
level.

Connections are incorrect.

Check the cords and 
connections.

•  The receiver does not 

work at all.

The built-in microcomputer 
may have functioned 
incorrectly due to noise, etc.

Reset the receiver (see page 
2).

FM/AM

•  SSM automatic presetting 

does not work.

Signals are too weak.

Store stations manually.

•  Static noise while listening 

to the radio.

The antenna is not connected 
firmly.

Connect the antenna firmly.

Disc playback

•  Disc automatically ejects.

Disc is inserted upside 
down.

Insert the disc correctly.

•  CD-R/CD-RW cannot be 

played back.

•  Tracks on the CD-R/

CD-RW cannot be 
skipped.

CD-R/CD-RW is not 
finalized.

•  Insert a finalized CD-R/

CD-RW.

•  Finalize the CD-R/

CD-RW with the 
component which you 
used for recording.

•  Disc can be neither played 

back nor ejected.

Disc is locked.

Unlock the disc (see page 
11).

The CD player may have 
functioned incorrectly.

Eject the disc forcibly (see 
page 2).

•  Disc sound is sometimes 

interrupted.

You are driving on rough 
roads.

Stop playback while driving 
on rough roads.

Disc is scratched.

Change the disc.

Connections are incorrect.

Check the cords and 
connections.

•  “NO DISC” appears on the 

display.

No disc is in the loading 
slot.

Insert a disc into the loading 
slot.

Disc is inserted incorrectly.

Insert the disc correctly.

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service 
center.

EN14-19_KD-G116[U_UH]f.indd   18

10/9/04, 1:44:44 PM

Summary of Contents for KD-G115



































































Reviews: