ENGLISH
23
SETTINGS
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on page 24.
1
Enter the PSM settings.
2
Select a PSM item.
3
Select or adjust the selected PSM item.
4
Repeat steps
2
and
3
to adjust other
PSM items if necessary.
5
Finish the procedure.
Adjusting the sound
1
2
Adjust the level.
BAS
*
1
(bass)
Adjust the bass.
–06 to +06
TRE
*
1
(treble)
Adjust the treble.
–06 to +06
FAD
*
2
(fader)
Adjust the front and rear speaker
balance.
R06 to F06
BAL
(balance)
Adjust the left and right speaker
balance.
L06 to R06
LOUD
*
1
(loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
VOL.A
*
3
(volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
–05 to +05;
initial: 00
VOL
(volume)
Adjust the volume.
00 to 30
(or 50)
*
4
*
1
When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently
selected sound mode (C-EQ) including “USER.”
*
2
If you are using a two-speaker system, set the fader
level to “00.”
*
3
You cannot make an adjustment for FM. “FIX”
appears.
*
4
Depending on the amplifier gain control setting. (See
page 24 for details.)
Continued on the next page
EN20-25_DV5306_001A_f.indd 23
EN20-25_DV5306_001A_f.indd 23
11/10/06 6:14:27 PM
11/10/06 6:14:27 PM