![JVC KD-DB97BT Instruction Manual Download Page 20](http://html.mh-extra.com/html/jvc/kd-db97bt/kd-db97bt_instruction-manual_175302020.webp)
18
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
SUB.W LEVEL
*
1
SPK-OUT
*
2
(Not applicable when 3-way crossover is selected.)
00
to
+06
(
+03
): Adjusts the output level of the
subwoofer connected via speaker lead. (
29
)
PRE-OUT
–50
to
+10
(
00
): Adjusts the output level of the
subwoofer connected to the lineout terminals (SW)
through an external amplifier. (
29
)
SUB.W
ON
/
OFF
: Turns on or off the subwoofer output.
FADER
(Not applicable when 3-way crossover is selected.)
R15
to
F15
(
00
): Adjusts the front and rear speaker output balance.
BALANCE
*
3
L15
to
R15
(
00
): Adjusts the left and right speaker output balance.
VOL
ADJUST
–15
to
+06
(
00
): Preset the initial volume level of each source
(compared to the FM volume level). Before adjustment, select the source
you want to adjust.
AMP
GAIN
LOW
POWER
: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ;
HIGH POWER
: The maximum volume level is 35.
SPK/PRE
OUT
(Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting to get the desired output. (
19, Speaker output settings
)
SPK SIZE
Depending on the crossover type you have selected (see [
X ' OVER TYPE
]
below), 2-way crossover or 3-way crossover setting items will be shown.
(
19, Crossover settings)
By default, 2-way crossover type is selected.
X ' OVER
X ' OVER TYPE
Caution
: Adjust the volume before changing the
X ' OVER TYPE
to
avoid the sudden increase or decrease of the output level.
X ' OVER 2-WAY
(Displayed only when [
X ' OVER 3-WAY
] is selected)
YES
: Selects two way crossover type. ;
NO
: Cancels.
X ' OVER 3-WAY
(Displayed only when [
X ' OVER 2-WAY
] is selected)
YES
: Selects three way crossover type. ;
NO
: Cancels.
AUDIO SETTINGS
SND EFFECT
ENHANCE
(Not applicable for FM/AM source and DAB source.)
SML/ MED/ LRG
: Virtually enhances the sound space. ;
OFF
: Cancels.
RESPONSE
LV1
/
LV2
/
LV3
: Virtually makes the sound more realistic. ;
OFF
: Cancels.
SOUND LIFT
LV1
/
LV2
/
LV3
: Virtually adjust the sound position heard from the
speakers. ;
OFF
: Cancels.
VOL LINK EQ
ON
: Boosts the frequency to reduce the noise heard from outside the car
or running noise of the tyres. ;
OFF
: Cancels.
K2
(Not applicable for FM/AM source, DAB source and AUX source.)
ON
: Improve the sound quality of compressed music. ;
OFF
: Cancels.
*
1
Displayed only when [
SUB.W
] is set to [
ON
].
*
2
For 2-way crossover: Displayed only when [
SPK/PRE
OUT
] is set to [
SUB.W/SUB.W
].
(
19
)
*
3
This adjustment will not affect the subwoofer output.
JS_JVC_KD_DB97BT_E_EN_2.indd 18
JS_JVC_KD_DB97BT_E_EN_2.indd 18
19/11/2015 10:51:37 AM
19/11/2015 10:51:37 AM