30
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Symptom
Remedy
General
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the
[SOURCE SELECT]
setting. (Page 4)
The unit does not work at all. Reset the unit. (Page 3)
Correct characters are not
displayed.
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 5), some characters may not be displayed
correctly.
Digital Radio
DAB reception is poor.
Make sure
[ON]
is selected for
[DAB ANT POWER]
.
(Page 7)
“CHK ANTENNA”
Check the DAB antenna. If a passive antenna (without
a booster) is used, set
[DAB ANT POWER]
to
[OFF]
.
(Page 7)
“RELATED SERV FOUND”
• Press the volume knob to activate Soft-Link.
(Page 7)
• Press
to cancel.
Analog
Radio
• Radio reception is poor.
• Static noise while listening
to the radio.
Connect the antenna firmly.
CD/USB/
iPod
Disc cannot be ejected.
Press and hold to forcibly eject the disc. Be careful
not to drop the disc when it is ejected.
Noise is generated.
Skip to another track or change the disc.
TROUBLESHOOTING
Symptom
Remedy
CD/USB/iPod
“IN DISC” appears and disc
cannot be ejected.
Make sure nothing is blocking the loading slot when you
eject the disc.
“PLEASE EJECT” appears.
Press , then insert the disc correctly.
Playback order is not as
intended.
The playback order is determined by the order in which
files were recorded (disc) or the file name (USB).
Elapsed playing time is not
correct.
This depends on the recording process earlier (disc/USB).
“NOT SUPPORT” appears and
track skips.
Check whether the track is a playable format.
(Page 27, 28)
“READING” keeps flashing.
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the device (USB/iPod/
iPhone).
“UNSUPPORTED DEVICE”
appears.
• Check whether the connected USB device is compatible
with this unit and ensure the file systems are in
supported formats. (Page 27, 28)
• Reattach the USB device.
“UNRESPONSIVE DEVICE”
appears.
Make sure the USB device is not malfunction and reattach
the USB device.
“USB HUB IS NOT
SUPPORTED” appears.
This unit cannot support a USB device connected via a
USB hub.
“CANNOT PLAY” appears.
Connect a USB device that contains playable audio files.
• The source does not
change to “USB” when
you connect a USB device
while listening to another
source.
• “USB ERROR” appears
The USB port is drawing more power than the design
limit. Turn the power off and unplug the USB device.
Then, turn on the power and reattach the USB device.
If this does not solve the problem, turn the power off and
on (or reset the unit) before replacing with another USB
device.
JS_JVC_KD_DB902BT_E_EN_3.indd 30
JS_JVC_KD_DB902BT_E_EN_3.indd 30
7/11/2018 4:43:38 PM
7/11/2018 4:43:38 PM
