43
ENGLISH
To be continued....
• This receiver can play back the files recorded
in VBR (variable bit rate).
The files recorded in VBR have a discrepancy
in elapsed time display, and do not show
the actual elapsed time. Especially, after
performing the search function, this difference
becomes noticeable.
• This receiver cannot play back the following
files:
– MP3 files encoded with MP3i and MP3 PRO
format.
– MP3 files encoded in an unappropriated
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless,
professional, and voice format.
– WMA files which are not based upon
Windows Media
®
Audio.
– WMA files copy-protected with DRM.
– Files which have the data such as WAVE,
ATRAC3, etc.
• The search function works but search speed is
not constant.
Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select “CD,” “SD,” or
“CD-CH” for the playback source, playback
starts from where it has been stopped
previously.
ImageLink
• ImageLink will not work in the following
cases:
– If no <jll> file is included in an MP3/WMA
folder.
– If Intro Scan is activated.
– If the source is changed to another from
“CD” or “SD.”
– If more than one <jll> file are included in a
folder, a file with the youngest file number
is used for the graphic screen.
Ejecting a disc
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to prevent it from
dust. (Disc will not play this time.)
Sound adjustment
General
• Sound adjustments cannot affect the Voice
Support System (VSS: see page 29) output.
VSS sound always comes out of all speakers
connected.
• If you are using a two-speaker system, set the
fader level to “0.”
• Subwoofer out setting takes effect only when
a subwoofer is connected.
• You cannot change the input level—Volume
Adjustment—of the FM stations. If the source
is FM, “Fix” will appear when you try to
adjust it.
Storing your own sound modes
• If you do not want to store your current
adjustment, but only to apply the adjustment
to the current playback source, press “BACK”
repeatedly to go back to the operation screen
of the current source. Adjustment you made
remains effective until you select a sound
mode.
EN42-49_AR5500_LHX550[J]f.indd 43
EN42-49_AR5500_LHX550[J]f.indd 43
12/6/04 1:49:23 PM
12/6/04 1:49:23 PM
