10
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication, [Range]
BAS
*
1
(bass), [–06 to +06]
Adjust the bass.
TRE
*
1
(treble), [–06 to +06]
Adjust the treble.
FAD
*
2
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL
(balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD
*
1
(loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at low volume level.
VOL
(volume), [00 to 30 or 50
*
3
]
Adjust the volume.
*
1
When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including “USER.”
*
2
If you are using a two-speaker system, set the
fader level to “00.”
*
3
Depending on the amplifier gain control
setting. (See page 11 for details.)
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
3
Adjust the PSM item selected.
4
Repeat steps
2
and
3
to adjust other
PSM items if necessary.
5
Finish the procedure.
General settings — PSM
EN06-11_KD-G227[EE]f.indd 10
EN06-11_KD-G227[EE]f.indd 10
10/21/05 12:40:46 PM
10/21/05 12:40:46 PM
