JVC KD-A605J, Service Manual

Page: 10 / 85

1-10 (No.MA442<Rev.002>)
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
2.1 Identification method
Supported reduction in cost, and board contents was changed.
A set put the following label on is an object.
SECTION 3
DISASSEMBLY
3.1 Main body (Used figure are KD-A605)
3.1.1 Removing the Bottom chassis (See Fig.1, 2)
(1) Remove the three screws A attaching the Heat sink. (See
Fig.1)
Fig.1
(2) Remove the two screws B and one screw C attaching the
Bottom chassis. (See Fig.2)
Fig.2
(3) Slide to backward and the remove the Bottom chassis.
3.1.2 Removing the Front chassis (See Fig.3)
(1) Disengage four hooks a engaged both side of the Front
chassis.
Fig.3
3.1.3 Removing the Main board (See Fig.4 to 6)
(1) Remove the two screws D and one screw E attaching the
Side plate. (See Fig.4)
Fig.4
Top view
Change pwb parts
Front side
Label position
A
B
C
hook
a
D
E