34
EN
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Fade/Wipe Effects
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next. You can also vary
transitions from scene to scene.
IMPORTANT:
Some Fade/Wipe Effects cannot be used with
certain modes of Program AE with special
effects (
pg. 36, 37). If an unusable Fade/
Wipe Effect is selected, its indicator blinks or
goes out.
Recording Start/
Stop Button
MENU Wheel
Power Switch
FADE/WIPE SELECTION
(
,
,
,
,
,
,
,
and
)
Fade or Wipe works when video recording is started or
when you stop recording.
1
Set the Shooting Mode Switch to “VIDEO” and set the
Power Switch to “
” while pressing down the Lock
Button located on the switch. Pull out the viewfinder
fully or open the LCD monitor fully.
2
Press the
MENU
wheel. The Menu Screen appears.
3
Set “CAMERA MODE” to “VIDEO” or “PS-VIDEO” in
the Menu Screen (
pg. 28, 29).
4
Rotate the
MENU
wheel to select “
FADER/WIPE”,
then press it. Rotate the
MENU
wheel to select the
desired function, then press it. Selection is complete.
5
Press the
MENU
wheel again. The Menu Screen
closes.
6
To activate the Fade-in or Wipe-in . . .
.... Press
FADE/WIPE
during Record-Standby mode
so that the selected effect indicator appears.
To activate the Fade-out or Wipe-out . . .
.... Press
FADE/WIPE
during recording so that the
selected effect indicator appears.
7
Press the Recording Start/Stop Button to activate the
Fade-in/out or Wipe-in/out.
PICTURE WIPE OR DISSOLVE SELECTION
(
,
,
,
,
,
and
)
The Picture Wipe or Dissolve works when video recording
is started.
1
Follow steps
1
through
5
above.
2
Engage the Record-Standby mode.
If you press FADE/WIPE during recording . . .
.... press the Recording Start/Stop Button when one
scene is finished. The point at which the scene
ended is stored in memory.
If you press FADE/WIPE during Record-Standby
mode . . .
.... press the Recording Start/Stop Button to start
recording and press it again when one scene is
finished. The point at which the scene ended is
stored in memory.
3
If you start recording a new scene within 5 minutes of
the end of the previous recording (without having
turned the camcorder’s power off), the previous scene
wipes out, revealing the new scene.
To Deactivate The Selected Effect . . .
.... press
FADE/WIPE
again in step
6
so that
the effect indicator disappears.
NOTES:
●
You can extend the length of a Fade or Wipe
by pressing and holding the Recording Start/
Stop Button.
●
If the power is turned off after a scene is
finished recording, the stored point is erased,
disabling the Picture Wipe/Dissolve combina-
tion. When this happens, the Picture Wipe/
Dissolve indicator blinks. Also note that
power shuts off automatically if 5 minutes
elapse in the Record-Standby mode.
●
Picture Wipe/Dissolve cannot be used when
“CAMERA MODE” is set to “PS-VIDEO”.
●
All Fade/Wipe Effects cannot be used when
“CAMERA MODE” is set to “DUAL”.
●
The sound at the end of the last recorded
scene is not stored.
Shooting Mode Switch
FADE/WIPE Button
