JVC InteriArt T-V LINK AV-28H4BU Instructions Manual Download

Page: 30 / 46

INSTALL

ENGLISH

AV-32/28H4SU/BU / LCT1583-001A-U / English

4 Press the

button to display the

T-V LINK menu

5 If you do not have a T-V LINK

compatible VCR connected:

Press the

button to exit the T-V LINK

menu.

If you have a T-V LINK compatible

VCR connected to the EXT-2

terminal:

Follow the operating procedure

“Downloading the data to VCR” on
page 35 to transmit the Programme
number (PR) data.

• When your TV can detect the TV

channel name from the TV channel

broadcast signal, it automatically
registers the TV channel name (ID) to
the Programme number (PR) in which

the TV channel has been registered.

• If a TV channel you want to view is

not set to a Programme number (PR),
manually set it using the MANUAL
function. For details, see “EDIT/

MANUAL” on page 29.

• The TV channel is not registered in

Programme number PR 0 (AV). When
you want to register a TV channel to
PR 0 (AV) manually set it using the

MANUAL function. For details, see
“EDIT/MANUAL” on page 29.

EDIT/MANUAL

The EDIT/MANUAL functions are divided
into two types: editing of the current

Programme numbers (PR) (EDIT functions)
and manual registration of a TV channel you
want to view to the Programme number (PR)

(MANUAL function). The details about
these functions are as follows:

Caution

• Using the MOVE, DELETE or INSERT

function rewrites the current Programme

numbers (PR) list. Resultingly, the

Programme number (PR) of some of the

TV channels will change.

• Using the MANUAL function for a TV

channel for which the CHILD LOCK

function has been set cancels the CHILD

LOCK function for the TV channel.

• Using the MANUAL function for a TV

channel for which the DECODER (EXT-2)

function has been set to ON returns the

setting of the DECODER (EXT-2) function

for the TV channel to OFF.

• When a TV channel has already been

registered in PR 99, using the INSERT

function deletes the TV channel.

1 Choose EDIT/MANUAL, then press

the

button

• For Programme number PR 0, “AV”

appears in the Programme numbers
(PR) list.

• An EXT terminal number does not

appear in the Programme numbers

(PR) list.

D0005-EN

BACK

DOWNLOAD TV

VCR

T-V LINK

EXIT

D0038-EN

MOVE

EDIT

CH / CC

BBC1

INSERT

DELETE

MANUAL

BACK

AV-32&28H4SUBU_Eng.book Page 29 Tuesday, January 6, 2004 11:09 AM

Summary of Contents for InteriArt T-V LINK AV-28H4BU















































Search results

Summary of Contents for InteriArt T-V LINK AV-28H4BU

Reviews:

Related manuals for InteriArt T-V LINK AV-28H4BU

Brands by name

Popular brands

JVC InteriArt T-V LINK AV-28H4BU, Instructions Manual

Search results

Summary of Contents for InteriArt T-V LINK AV-28H4BU

Reviews:

Related manuals for InteriArt T-V LINK AV-28H4BU

Brands by name

Popular brands