background image

1

ENGLISH

PD-42X50BU/J/S / LCT1770-001A-U / English (EK)

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you 
begin.

WARNING

Always use the power cords which are supplied with the TV.
Some power cords are supplied with this TV. Use the power cord which best suits the area in which 
you live, and insert it into a correctly earthed outlet.

Failure to use the supplied power cord or to insert it into a correctly earthed outlet may result in electric 
shocks.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS 

APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

• Operate only from the power source specified (AC 110 – 240 V, 50 Hz) on the unit.
• Avoid damaging the AC plug and power cord.
• When you are not using this unit for a long period of time, it is recommended that you disconnect 

the power cord from the main outlet.

Distance recommendations

Avoid improper installation and never position the unit 

where good ventilation is impossible.
When installing this TV, distance recommendations 
must be maintained between the set and the wall, as well 

as inside a tightly enclosed area or piece of furniture.
Keep to the minimum distance guidelines shown for safe 
operation.

200 mm

200 mm

50 mm

50 mm

150 mm

150 mm

PD-42X50(EK)_Eng.book  Page 1  Friday, October 8, 2004  10:37 AM

Summary of Contents for InteriArt PD-42X50BJ



























































Reviews: