1-12 (No.YA014)
3.1.3
REMOVING THE FUN BRACKET, REGULATOR PWB AND POWER CORD (Fig.3-1-3)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
(1) Disconnect the wire(CONN. [Y]) of FUN MOTOR.
(2) Remove the 5 screws [F], and remove the FUN BRACKET.
(3) Remove the REGULATOR PWB, and disconnect the
POWER CORD.
(4) Remove the 1 screw [G], and remove the POWER CORD
HOLDER.
Fig.3-1-3
3.1.4
REMOVING THE RECEIVER PWB (Fig.3-1-4)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
(1) Remove the 2 screws [H] and 2 screws [J], then remove the
TERMINAL BASE.
(2) Remove the 5 screws [K], and remove the RECEIVER
PWB.
Fig.3-1-4
3.1.5
REMOVING THE FRONT CONTROL PWB AND FRONT SENSOR PWB (Fig.3-1-5)
• Remove the STAND ASS'Y.
• Remove the REAR COVER.
(1) Remove the 2 screws [L], and remove the CONTROL
KNOB.
(2) Remove the 3 screws [N], then remove the FRONT
CONTROL PWB and FRONT SENSOR PWB.
Fig.3-1-5
G
G
FUN BRACKET
POWER CORD
POWER CORD HOLDER
REGULATOR
PWB
FUN MOTOR
F
F
G
TERMINAL BASE
RECEIVER PWB
K
H
K
J
U
T
F
HARNES( F,U,T),"S" WIRE
CLAMP
T
FRONT CONTROL PWB
EARTH PLATE
FRONT SENSOR PWB
CONTROL KNOB
M
L
