(No.YA169)1-21
SECTION 4
ADJUSTMENT
4.1
ADJUSTMENT PREPARATION
(1) Prior to the following procedure, be sure to connect the
receiver unit and the display unit.
(2) Adjustment of many Majority of the adjustment items for
this unit is performed using the remote control.
(3) However, adjustment of some adjustment items is
performed in the conventional way, i.e. with components
on the boards.
(4) Ensure that the power supply is AC220V.
(5) Allow the set and the measuring devices to run for at least
30 minutes.
(6) Do not alter settings of items/preset values on the service
screen that are not stated in this manual.
(7) Unless otherwise stated in the “ADJUSTMENT
PROCEDURE” section, follow the settings for the features
stated below using the remote control.
4.2
MEASURING INSTRUMENT AND FIXTURES
• DC voltmeter (or Digital voltmeter)
• Oscilloscope
• Signal generator (Pattern generator)
• Remote control unit
Setting item
Settings
PICTURE MODE
STANDARD
PICTURE adjustment
All center (00)
COLOUR TEMP.
NORMAL
DIGITAL VNR
MIN
Super Digi Pure
AUTO
SOUND adjustment
All center (00)
BBE
OFF
AHS
OFF
A.H.B
OFF
ZOOM
FULL
Summary of Contents for InteriArt LT-26C31BC
