background image

2

HV-32/28P40BJ / LCT1687-001A-U / English

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you 
begin.

Failure to take the following precautions may result in damage to the TV or 

remote control.

DO NOT block the TV’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be 
able to get out.)

DO NOT place anything on top of the TV.

(such as cosmetics or medicines, flower vases, potted plants, cups, etc.)

DO NOT allow objects or liquid into the cabinet openings.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

DO NOT place any naked flame sources, such as lighted candles, on the TV.

D.I.S.T. demonstration

To start the D.I.S.T. demonstration: 

Press the 

H

 button to display the menu bar. Then press the yellow button.

A picture split in two (D.I.S.T. turned on and D.I.S.T. turned off) will appear on the screen.

To quit the D.I.S.T. demonstration:
Press the yellow button, 

b

 button, 

p

 

p

 buttons or any of the number buttons.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS 

APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

• Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit.
• Avoid damaging the AC plug and power cord.

• When you are not using this unit for a long period of time, it is recommended that you disconnect 

the power cord from the mains outlet.

Distance recommendations

Avoid improper installation and never position the unit 
where good ventilation is impossible.
When installing this TV, distance recommendations 

must be maintained between the set and the wall, as well 
as inside a tightly enclosed area or piece of furniture.
Keep to the minimum distance guidelines shown for safe 

operation.

The surface of the TV screen is easily damaged. Be very careful with it when handling the TV.
Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it hard.

Never use any cleaner or detergent on it.

In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it 
yourself or remove the rear cover.

HV-32&28P40BJ_Eng.book  Page 2  Thursday, July 29, 2004  9:25 AM

Summary of Contents for InteriArt HV-28P40BJ




















































Reviews: