JVC InteriArt HV-28P37SJE Service Manual Download Page 41

Page: 41 / 43

(No.YA010)1-41

4.8.9 SUB SCREEN ADJUSTMENT

Item

Measuring

instrument

Test point

Adjustment part

Description

SUB SCREEN
CONTRAST

Signal
generator

Remote
control unit

[2. V/C]
11. TWN_CONT

(1) Set the screen to the multi (twin) mode.
(2) Receive the black and white signal (color off) to both

right and left screen.

(3) Select 2. V/C.
(4) Set the initial setting value of < 11. TWN_CONT >.
(5) If the contrast of both screen are not the best with the

initial setting value, make fine adjustment of the < 11.
TWN_CONT > until you get the optimum contrast.

(6) Press the [MENU] key to memorize the adjustment

values.

SUB SCREEN
COLOUR &
TINT

Signal
generator

Remote
control unit

TP-47R
TP-E
[CRT SOCKET
PWB]

[2. V/C]
12. TWN_COL
13. TWN_TNT

PAL COLOUR

(1) Set the screen to the multi (twin) mode.
(2) Receive PAL full field colour bar signal (75% white)

to the sub screen.

(3) Select 2. V/C.
(4) Set the initial setting value of < 12. TWN_COL >.
(5) Connect the oscilloscope between TP-47R and

TP-E at the CRT SOCKET PWB.

(6) Adjust < 12. TWN_COL > so that the voltage

difference between white and red 5V.

(7) Press the [MENU] key to memorize the adjustment value.

SECAM COLOUR [Except model for UK]

(1) Set the screen to the multi (twin) mode.
(2) Receive SECAM colour bar signal (75% white) to the

sub screen.

(3) Select 2. V/C.
(4) Set the initial setting value of < 12. TWN_COL >.
(5) Connect the oscilloscope between TP-47R and

TP-E at the CRT SOCKET PWB.

(6) Adjust < 12. TWN_COL > so that the voltage

difference between white and red become 0V.

(7) Press the [MENU] key to memorize the adjustment value.

NTSC COLOUR

(1) Set the screen to the multi (twin) mode.
(2) Input NTSC3.58 full field colour bar signal (75%

white) from the EXT terminal to sub screen.

(3) Select 2. V/C.
(4) Set the initial setting value of < 12. TWN_COL >.
(5) Connect the oscilloscope between TP-47R and

TP-E at the CRT SOCKET PWB.

(6) Adjust < 12. TWN_COL > so that the voltage

difference between white and red become -2V.

(7) Press the [MENU] key to memorize the adjustment value.

NTSC TINT

(1) Set the screen to the multi (twin) mode.
(2) Input NTSC3.58 full field colour bar signal (75%

white) from the EXT terminal to sub screen.

(3) Select 2. V/C.
(4) Set the initial setting value of < 13. TWN_TNT >.
(5) Connect the oscilloscope between TP-47R and

TP-E at the CRT SOCKET PWB.

(6) Adjust < 13. TWN_TNT > so that the voltage

difference between white and yellow 1V.

(7) Press the [MENU] key to memorize the adjustment value.

Initial setting value

Colour system

PAL

SECAM

NTSC 3.58

SUB SCREEN COLOUR

Adjustment value

PAL

NTSC 3.58

SECAM

+5V

-2V

SUB SCREEN COLOUR ADJUSTMENT VALUE[V]

Initial setting value

NTSC 3.58

SUB SCREEN TINT

Adjustment value

NTSC 3.58

+1V

SUB SCREEN TINT ADJUSTMENT VALUE[V]

Summary of Contents for InteriArt HV-28P37SJE












































Search results

Summary of Contents for InteriArt HV-28P37SJE

Reviews:

Related manuals for InteriArt HV-28P37SJE

Brands by name

Popular brands

JVC InteriArt HV-28P37SJE, Service Manual

Search results

Summary of Contents for InteriArt HV-28P37SJE

Reviews:

Related manuals for InteriArt HV-28P37SJE

Brands by name

Popular brands