JVC InteriArt HV-28D40BK Instructions Manual Download

Page: 21 / 60

Remote control buttons and functions

HV-32/28D40BK / LCT1596-001A-U / ENGLISH

• Choose the main-picture channel by

pressing the

buttons. Choose

the sub-picture channel by pressing the

buttons.

• You cannot use the

(swap) button.

When watching Digital terrestrial
broadcasting (DVB-T), the main-
picture and sub-picture cannot be

switched.

• 1125i, 625p, and 525p signal pictures

cannot be displayed as the sub-picture.

To return the multi-picture to one

screen:

Press the

button, press the

buttons to choose one screen, and then

press the

button.

• Pressing the

TV/DTV

button will also

return the display to one screen.

When watching Analogue terrestrial

broadcasting:

1 Press the

button

The MULTI-PICTURE menu appears.

2 Press the

buttons to choose

the number of screens and then

press the

button

2-pictures multi:

12-pictures multi:

• When set to 2-pictures multi, you can

view a TV picture and a picture from
an external device. You can not view a

TV picture on more than one screen at
the same time.

• When 12-pictures multi is set, pictures

from external devices are not
displayed.

• When set to 2-pictures multi, the main-

picture can be changed by pressing the

buttons. The sub-picture screen

can be changed by pressing the

buttons.
When set to 12-pictures multi and

there are more than 12 pictures, the
next or previous 12 screens can be
displayed by pressing the

buttons.

• When set to 2-pictures multi, press the

(swap) button to switch the main-

picture and sub-picture.

• 2-pictures multi function does not

work for a picture of 1125i signal.

• A picture of 625p or 525p signal

cannot be displayed as the sub-picture.
Pay attention to the following.

- When the EXT-4 picture is a picture

of 625p or 525p signal, you cannot
choose EXT-4 with the

buttons.

- When the EXT-4 picture signal is

changed to 625p, 525p or 1125i
signal while the EXT-4 picture is

displayed as the sub-picture, the 2-
pictures multi function is cancelled.

D0101-EN

D0102

D0103

D0104

Choose to return to one screen.

Choose to change to 2-pictures multi.

Choose to change to 12-pictures multi.

D1056-EN

Main-

picture

Sub-

picture

D0058-EN

Still

pictures

Moving

picture

Changing the sub-picture

Displaying the next or

previous 12 screens

HV-32&28D40BK_Eng.book Page 21 Wednesday, April 21, 2004 1:17 PM

Summary of Contents for InteriArt HV-28D40BK





























































Search results

Summary of Contents for InteriArt HV-28D40BK

Reviews:

Related manuals for InteriArt HV-28D40BK

Brands by name

Popular brands

JVC InteriArt HV-28D40BK, Instructions Manual

Search results

Summary of Contents for InteriArt HV-28D40BK

Reviews:

Related manuals for InteriArt HV-28D40BK

Brands by name

Popular brands