5
Set Clock
In setting to AUTO, this TV will search for time signal that is sent in analog broadcast XDS. This TV
doesn’t set the time; it receives the broadcasted XDS information. In setting to MANUAL, function of
D.S.T. (Daylight Savings Time) is ineffective, even if D.S.T. is on.
Guide
When you set “SET CLOCK” to MANUAL, the time information in GUIDE or the channel banner may
not always display correctly. Also, please set D.S.T. on in summer and off in winter. And please note,
at times the broadcast stations does not always send the proper time.
Timer recording and viewing
Please note the following things when you set a timer recording manually.
ü
In the case of timer recording, this TV’s timer starts about 2 minutes before the time you set.
ü
In the case of the continuous timer setting, the previous program will be stopped about 15
seconds before the time you set.
When not receiving a TV broadcast
When not receiving a TV broadcast, follow these steps.
1. Turn the TV off with the remote control. Wait for a while and turn the power back on.
(If you are unable to turn the power off with the remote control, please disconnect the power cord
from the outlet and wait a few moments before plugging it back in.)
2. Select your requested channel.
3. If there is no picture on screen, try selecting other channels. If no channel can be selected, adjust
the antenna, and then execute AUTO TUNER SETUP again. If you still can't receive any
channels, there may be a malfunction. In this case, contact JVC.
If the TV can receive signals from other broadcasting stations but not the channel you selected,
please check Antenna Level. If the signal level is strong enough but "No Program" is displayed on
screen, this means that there is no data in the broadcast. In this case, AUTO TUNER SETUP needs
to be executed again, or you need to select the broadcast again after the broadcasting station restarts
their program.