JVC I'Art Palette PD-42X795 Additional Information Download Page 1

 

Additional information on using  

TV models PD-42/50X795, AV-48/56P775 and AV-56P785 

 

 

Thank you very much for purchasing a JVC TV. 

 

In order to help you maximize the benefits of your JVC TV, JVC may provide software upgrades in the 

future. Software upgrades will be particularly beneficial if you are using your JVC TV with either a 

CableCARD or Over-the-Air Digital tuner in addition to your analog tuner. By registering your new JVC 

TV through JVC’s warranty registration program, we will be able to automatically send you any 

software updates as soon as they become available. 

Please fill out the enclosed registration card or go to the following web link and click on “Product 

Registration” for faster processing: 

http://www.jvc.com/support/index.jsp 

 

Thank you again for your patronage. 

 

Note: 

Failure to register does not affect in any way your warranty or your right to the free software 

upgrades offered for your TV. 

 

 

Caution 

In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself 

or do not remove the top cover of a Receiver (PDP) or rear cover of a TV. Removing covers of either 

receiver or screen will void warranty. 

 

1. 

General   

Power on 

This TV  was designed with a low power consumption feature for energy savings. During stand-by 

mode, this feature decreases the power consumption to its lowest, taking some time for the picture to 

appear after turning the power on. In the case where a CableCARD has been inserted into the 

receiver or TV rear panel, the low power consumption feature will not work. 

 

Summary of Contents for I'Art Palette PD-42X795









Reviews: