JVC I' Art AV-27F802 Service Manual Download Page 29

Page: 29 / 33

AV-27F802

No. 51757

Item

Measuring

instrument

Test point

Adjustment part

Description

MTS SAP
VCO
adjustment

Signal
generator

Frequency
counter

No.9 5FH MON.

No.10 SAP VCO

1. Receive a RF signal (non modulated sound signal) from the an-

tenna terminal.

2. Connect between pin 3 of [S2] connector and GND (Pin 2 of [S2]

connector) through 1M

Resistor.

3. Select the No.9 5FH MON. of the SOUND MODE, and reset the

setting value from 0 to 1.

4. Connect the Frequency Counter to pin 5 of [S2] connector and GND

(Pin 2 of [S2] connector) .

5. Select the No.10 SAP VCO.
6. Set the initial setting value of the No.10 SAP VCO with the LEFT/

RIGHT key of the remote control unit.

7. Adjust the No.10 SAP VCO so that the frequency counter will dis-

play 78.67kHz±0.5kHz.

8. Select the No.9 5FH MON. of the SOUND MODE, and reset the

setting value from 1 to 0.

MTS FILTER
check

1. Select the No.6 FILTER of the SOUND MODE.
2. Verify that the No.6 FILTER is set at its initial setting value.

No.6 FILTER

[S2]
Connector
3 pin TP_952.5
2 pin GND
5 pin AUDIO_R

MTS
SEPARATION
adjustment

1. Input a stereo L signal (300Hz) from the TV audio multiplex signal

generator to the antenna terminal.

2. Connect an oscilloscope to pin 4 of [S2] connector, and display one

cycle portion of the 300Hz signal.

3. Change the connection of the oscilloscope to pin 5 of [S2] connec-

tor, and enlarge the voltage axis.

4. Select the No.7 LOW SEP. of the SOUND MODE.
5. Set the initial setting value of the No.7 LOW SEP. with the LEFT/

RIGHT key of the remote control unit.

6. Adjust the No.7 LOW SEP. so that the 300Hz signal level will be-

come minimum.

7. Change the signal to 3kHz, and connect an oscilloscope to pin 4 of

[S2] connector.

8. Adjust the No.8 HI SEP. so that the 3kHz signal level will become

minimum.

No.7 LOW SEP.

No.8 HI SEP.

TV audio
multiplex
signal
generator

Oscilloscope

[S2]
Connector
4 pin AUDIO_L
5 pin AUDIO_R
2 pin GND

L-Channel
signal waveform

R-Channel
crosstalk portion

Minimum

1 cycle

MTS INPUT
LEVEL
check

1. Select the No.2 IN LEVEL of the SOUND MODE.
2. Verify that the No.2 IN LEVEL is set at its initial setting value.

No.2 IN LEVEL

MTS STEREO
VCO
adjustment

Signal
generator

Frequency
counter

1. Receive a RF signal (nonmodulated sound signal) from the antenna

terminal.

2. Select the No.3 FH MONITOR of SOUND MODE, and change the

setting value from 0 to 1.

3. Connect the Frequency Counter to pin 5 of [S2] connector and GND

(Pin 2 of [S2] connector).

4. Select the No.4 STEREO VCO.
5. Set the initial setting value of the No.4 STEREO VCO with the LEFT/

RIGHT key of the remote control unit.

6. Adjust the No.4 STEREO VCO so that the frequency counter will

display 15.73kHz±0.1kHz.

7. Select the No.3 FH MONITOR of the SOUND MODE, and reset the

setting value from 1 to 0.

No.3 FH MONITOR

No.4 STEREO VCO

[S2]
Connector
5 pin AUDIO R
2 pin GND

ADJUSTMENT OF MTS CIRCUIT

Summary of Contents for I' Art AV-27F802


































Search results

Summary of Contents for I' Art AV-27F802

Reviews:

Related manuals for I' Art AV-27F802

Brands by name

Popular brands

JVC I' Art AV-27F802, Service Manual

Search results

Summary of Contents for I' Art AV-27F802

Reviews:

Related manuals for I' Art AV-27F802

Brands by name

Popular brands