HX-Z1
6
SECTION 2
Disassembly method
2.1 Main board
2.1.1 Removing the metal cover
(See Fig.1 ~ 3)
• Remove the six screws
A
on the back of the body.
• Remove the screw
B
on each side of the body.
• Remove the metal cover from the body by lifting the rear part
of the cover.
CAUTION:
Do not break the front panel tab fitted to the metal cover.
2.1.2 Removing the CD changer mechanism assembly
(See Fig.4, 5)
• Prior to performing the following procedure, remove the metal
cover.
(1) Disconnect the card wire from connector CN651 on the
CD servo control board on the right bottom of the CD
changer mechanism assembly.
(2) Remove the four screws
C
attaching the CD changer
mechanism assembly on top of the body.
(3) Remove the CD changer mechanism assembly while lift-
ing the rear part.
CAUTION:
Do not damage the CD fitting when removing the CD changer
mechanism assembly.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Summary of Contents for HX-Z1
