3
HV-34LH11/29WH11 / GGT0021-001A-H / Chinese
Setting up your TV
CAUTION
• Turn off all the equipment including the
TV before connecting anything.
1 Connecting the aerial and VCR
• Aerial cable is not supplied. Use a
good quality 75-ohm coaxial cable.
• Read the manual that came with the
VCR before connecting.
If not connecting a VCR (see Fig. A):
Connect an aerial cable to the aerial socket
on this TV.
If connecting a VCR (see Fig. B):
1 Connect the aerial cable to the aerial
input socket on the VCR, and connect
the VCR and TV with another aerial
cable.
2 Connect the VCR’s VIDEO OUT (video
output) jack and the TV’s VIDEO jack
with a video cable.
To connect a VCR to the TV with an S-
VIDEO cable:
Connect the VCR’s S-VIDEO OUT (S-
VIDEO output) connector and TV’s S
connector with an S-VIDEO cable
A
,
instead of connecting with a video cable.
3 Connect the VCR’s VIDEO OUT (audio
L/R output) jacks and the TV’s AUDIO
jacks (L/MONO and R) with an audio
cable.
• If the VCR’s audio output is in mono,
connect the VCR’s AUDIO OUT (audio
output) jack and the TV’s AUDIO L/
MONO jack with an audio cable.
R
R
L
L/MONO
AUDIO
AUDIO
L/MONO
R AUDIO
C
R
C
Y/VIDEO
B
VIDEO
VIDEO-2
VIDEO
OVER
S
VIDEO-3/
COMPONENT
VIDEO-1
OUTPUT
R
R
L
L/MONO
AUDIO
AUDIO
L/MONO
R AUDIO
C
R
C
Y/VIDEO
B
VIDEO
VIDEO-2
VIDEO
OVER
S
VIDEO-3/
COMPONENT
VIDEO-1
OUTPUT
A
Back of the TV
Fig. A
Back of the TV
Fig. B
HV-34LH&29WH_En(ch).book.fm Page 3 Thursday, August 28, 2003 2:49 PM
