26
Adjusting tracking condition
Special playback
Reverse picture search function
Picture Search
Press
REW
x 1 or x 2 during the playback.
Forward picture search function
Press
FF
x 1 or x 2 during the playback.
To return to playback: Press
PLAY
.
Still Picture
Press
PAUSE
during playback. To resume normal
playback: Press
PLAY
.
Slow Motion
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyzes the signal to enable optimum picture quality
during playback.
During playback press
SLOW
.
To return to playback: Press
PLAY
or
SLOW
.
Press
PAUSE
during playback.
Press
SLOW
one by one: The picture advances frame
by frame.
To return to playback: Press
PLAY
or
PAUSE
.
Frame by Frame picture
NOTES:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• The Special Playback will automatically change to
playback after approx. 5 minutes to protect the video
tape against excessive wear.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the
SET +
or
–
to reduce the noise bars.
If the still picture jitters excessively, press
SET +
or
–
to stabilize the still picture.
Automatic tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press
SET +/–
to eliminate the noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
Manual tracking adjustment
Repeat playback
The entire video tape will be played until its end.The
tape will then automatically rewind to the beginning and
the playback will be repeated.
1
Press
SET UP
MENU
. Press
or
to select “AUTO
REPEAT”.
3
Press
SET UP MENU
until the menu screen is
cleared.
If you press
OSD
, " " will appear on the screen.
Then press
ENTER
to
select “ON” or “OFF”.
If “ON” is selected, the
playback will be
repeated endlessly.
4
To start the playback, press
PLAY
.
The playback will be repeated endlessly.
2
To cancel repeat mode
:
Follow the above step
1
, then press
ENTER
to select
the “OFF” position. Press
SET UP MENU
to return to
the TV.
Press
A.TRK
to reactivate automatic tracking again.
“AUTO TR.” will appear.
•
Skip Search
Each time you press
SKIP SEARCH
while a tape is
playing, the unit will fast-forward ahead 30 seconds
on the tape. You may press the button up to six times
in a row to move 180 seconds (three minutes) ahead.
1 press:
30 seconds of tape
2 presses: 60 seconds of tape
3 presses: 90 seconds of tape
For example:
á+/Ð/ENTER/MENUñ
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
á+/Ð/ENTER/MENUñ
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
2C31501AE(P22-27)
09/12/2002, 15:40
26