Filename [XV38ASAG_057S-VHS.fm]
Masterpage:Left+
22
EN
Page 22
December 8, 2004 3:22 pm
OPERATIONS ON VHS DECK (cont.)
Instant ReView
Simply by pressing a single button, the unit power comes on,
rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the unit is off and that the Timer
mode is disengaged.
Activate Instant ReView.
Press
. The unit power comes on and the unit
searches for the index code indicating the start of the last
timer-recorded programme. Once it’s found, playback
begins automatically.
●
To watch the first of the 3 programmes, press
three
times. The unit searches and begins playback automatically.
You can access a programme as far as 9 index codes away
from the current tape position.
Repeat Playback
Your unit can automatically play back the whole tape 100 times
repeatedly.
1
Start playback.
Press
4
.
2
Activate Repeat Playback.
Press
4
and hold for over 5 seconds, then release.
●
The Play indicator (
$
) on the front display panel blinks slowly.
●
After playing back a tape 100 times, the unit stops
automatically.
3
Stop Repeat Playback.
Press
8
at any time.
●
Pressing
4
,
3
,
5
or
9
also stops Repeat Playback.
NOTE:
Repeat playback is not possible with a cassette recorded in EP
mode.
Manual Tracking
Your unit is equipped with automatic tracking
control. During playback, you can override this
and adjust the tracking manually by pressing the
TR/–
buttons.
1
Override automatic tracking.
During playback, press
TR
and
–
at
the same time.
2
Adjust the tracking manually.
Press
TR/–
.
●
Press
TR
and
–
at the same time again to return to
automatic tracking.
NOTE:
When a new tape is inserted, the unit enters the automatic
tracking mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing
A.MONITOR
changes the soundtrack as follows:
NOTES:
●
“HIFI L
j h
R” should normally be selected. In this mode,
Hi-Fi stereo tapes are played back in stereo, and the normal
audio track is played back automatically for tapes with only
normal audio.
●
For instructions on recording stereo and bilingual
programmes, refer to page 25.
●
“O.S.D.” must be set to “ON” or the on-screen displays will
not appear. (
墌
pg. 54)
Slide to the
right.
TRACK
USE
On-Screen Display
HI FI
L
j
h
R
For Hi-Fi stereo tapes
HI FI
L
j
For main audio of Bilingual tapes
HI FI
h
R
For sub audio of Bilingual tapes
NORM
For audio-dubbed tapes
HI FI
NORM
For audio-dubbed tapes
XV38ASAG_EN_BOOK.book Page 22 Wednesday, December 8, 2004 4:00 PM
