38
Troubleshooting (Continued)
Symptom
Cause
Correction
The DVD+VCR does not
start playback.
•
An unplayable disc is inserted.
•
Insert a playable disc. (Check the disc
type and Regional code.)
•
The disc is placed upside down.
•
Place the disc with the playback side
down.
•
The disc is not placed within the guide.
•
Place the disc on the disc tray correctly
inside the guide.
•
The disc is dirty.
•
Clean the disc.
•
The Rating level is set.
•
Cancel the Rating function or change
the rating level.
Video tape cannot be
inserted.
•
Is the cassette compartment empty?
•
Eject the tape in.
No Hi-Fi sound
•
Audio mode is not set properly.
•
Select STEREO by repeatedly pressing
AUDIO on the remote control.
No NICAM sound
recording
•
NICAM mode is not set properly.
•
Make sure NICAM in the menu is set to
AUTO for the station to be recorded.
The remote control does
not work properly.
•
There is an obstacle in the path of the
remote control and this unit.
•
Remove the obstacle.
•
The batteries in the remote control are
exhausted.
•
Replace the batteries with new ones.
•
The remote control is not pointed at the
remote sensor of the DVD+VCR.
•
Point the remote control at the remote
sensor of the DVD+VCR.
•
The remote control is too far from the
DVD+VCR.
•
Operate the remote control within 23ft
(7 m).
•
This remote control use the same buttons
for VCR and DVD functions (ex.PLAY).
•
When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
Timer recording is not
possible.
•
Clock in DVD+VCR is not set to correct
time.
•
Set clock to correct time.
•
Timer has been programmed incorrectly.
•
Reprogram Timer.
•
indicator light does not appear after
programming timer.
•
Reprogram Timer and turn DVD+VCR
off to enable timer.
VJ9033CP1Z_E-EZ.book Page 38 Friday, March 11, 2005 10:12 AM
