48
EN
PAUSE/
R.A. EDIT
REMOTE
PAUSE
R.A. EDIT
IN/OUT
START
C.RESET/CANCEL
This function makes it easier to create edited videos when your
video recorder is used as the source player in combination with
another JVC video recorder equipped with a Remote PAUSE
Connector. You can pre-program up to 8 scenes or “cuts” for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-JVC recorder. (
Z
pg. 49)
Random As-
semble Editing
EDITING (cont.)
MAKE CONNECTIONS
1
Connect your recorder’s AV1 IN/OUT or S-VIDEO
OUT/AUDIO OUT connectors to the video and audio
input connectors on the recording deck, and connect
your recorder’s PAUSE/R.A. EDIT connector to the
PAUSE connector on the recording deck.
●
If the recording deck doesn’t have a PAUSE connec-
tor, connect to the R.A. EDIT connector instead.
●
The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
PREPARE FOR EDITING
2
Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.
LOAD SOURCE CASSETTE
3
Insert the source cassette into your recorder.
SET EDIT MODE
4
See "Picture Control" on page 39.
START SOURCE PLAYBACK
5
Press PLAY.
ACCESS R.A. EDIT SCREEN
6
Press R.A. EDIT.
OR
Press MENU to access MAIN MENU screen and press
%fi
to move the highlight bar (pointer) to "R.A. EDIT",
then press OK.
●
The screen is superimposed on the video playback in
step 7.
Player
Your recorder
Audio signal
Video signal
Another recorder
(w/PAUSE connector)
Recorder
Mini-plug Cable
(Not provided)
1
3
2
8
SHUTTLE
JOG
7
8
9
3
4
1
2
3
4
0
OK
M
EN
U
PROG
PLAY