EN
21
Names of
special-effects
playback
Reverse
Forward
Search
Play
Slow-Motion
*Still
Slow-Motion
Play
Search
(Time Jog**)
(Time Jog**)
-9x
-7x -5x -3x
-1x
-1/2x
-1/3x
0
1/3x
1/2x
1x
1.5x 2x 3x 5x 7x 9x
-7x
-3x
-1/2x
0
1/2x
1x
1.5x 2x
5x
9x
Audio is output.
Audio is not
Audio is
Audio is
Audio is output.
output.
output.
output.
TimeScan
Speed LP
Speed SP
Audio output
●
If the picture jitters vertically, noise appears or the upper or lower part of the picture is distorded at -1/2x, -1/3x, 1/3x, 1/2x or
1.5x normal speed, use TV PROG + or – to correct the picture.
●
When noise appears or the upper or lower part of the picture is distorted during TimeScan search, press
and adjust
tracking with TV PROG + or – button.
●
The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be
distorted.)
●
To resume normal playback, press PLAY.
●
When using the recorder's TIME SCAN SHUTTLE ring, the playback speed may not change in the correct step if it is turned
too fast.
●
Picture and audio may become distorted when the recording speed changes. When this happens, resume normal playback
once, and then try using TimeScan again.
●
The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with
LP recordings.)
●
Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search of LP
recordings, or depending on the tape being used.
●
Picture may appear distorted in comparison to normal playback.
●
When normal playback resumes from search (including TimeScan), still, slow motion or frame-by-frame playback, the picture
may jitter vertically momentarily depending on the type of TV being used.
●
Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
●
In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
●
TimeScan sound quality will differ in comparison to normal playback.
●
When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 1.5x or
2x normal speed, the audio playback may be faster than normal.
●
Depending on the type of tape contents, the sound may not be clear during forward slow-motion playback.
●
Time Jog cannot be activated by pressing PAUSE for longer than 2 seconds.
●
When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
●
Picture will be monochrome with an LP-recorded MESECAM tape during TimeScan.
●
TimeScan does not work with NTSC playback.
●
TimeScan at -1/2x, 1/2x and 1.5x normal speed are not possible with a MESECAM tape.
If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below).
TimeScan Audio
The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required.
* The default setting is "ON".
1
Press MENU to access the Main Menu screen.
2
Move the highlight bar (pointer) to "MODE SET" by pressing
%fi
, then press OK or
#
.
3
Move the highlight bar (pointer) to "TIME SCAN AUDIO"
by pressing
%fi
, then press OK or
#
to select "ON" or "OFF".
4
Press MENU to return to the normal screen.
*
* Still mode cannot be engaged using the remote control's
@
or
#
button. Still mode can be engaged by
pressing the PAUSE button.
** Smooth slow motion delivering an uninterrupted moving image without distortion.
PREVIOUS PAGE
POWER SAVE
OFF
S-VHS
AUTO
AV1 SELECT
VIDEO
AV2 SELECT
AV2
COLOUR SYSTEM PAL/NTSC
TIME SCAN AUDIO
ON
[
5∞
]
=
[MENU] : EXIT
MODE SET
B. E. S. T.
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
O. S. D.
ON
DIRECT REC
ON
AUTO SP
=
LP TIMER
OFF
DIGITAL 3R
ON
NEXT PAGE
[
5∞
]
=
[MENU] : EXIT
Summary of Contents for HR-S8600EK
Page 75: ...EN 75 MEMO ...