background image

2

Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE IN-

SIDE

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.

The OPERATE button does not completely shut off mains

power from the unit, but switches operating current on and
off.

This unit is produced to comply with Standard IEC Publ. 65.

Please follow these precautions. Not doing so may result
in damage to the VCP, remote control, or video cassette.

Avoid extreme heat and direct sunlight.

Avoid extreme cold.

Avoid extreme humidity.

Avoid dust.

Avoid places subject to vibrations.

Avoid strong magnetic fields.

Do not block the VCP’s ventilation openings.

Do not place anything heavy on the VCP or remote
control.

Do not place anything which might spill on top of the
VCP or remote control.

Do not place the VCP on cushions, pillows, or thick
carpeting.

Use the VCP in a stable, horizontal position only.

Place cassettes in cassette cases and store vertically.

Beware of moisture condensation
Moisture in the air will condense on the VCP when you move it
from a cold place to a warm place, or under extremely humid
conditions — just as water droplets form on the surface of a
glass filled with cold liquid. Moisture condensation on the head
drum will cause damage to the tape. In conditions where
condensation may occur, keep the VCP’s power turned on for
a few hours to let the moisture dry.

When transporting

7

Be sure to remove cassette from VCP before packing.

7

Avoid violent shocks to the VCP during packing and trans-
port.

7

Only cassettes marked “VHS” can be used with this video
cassette player.

Table of contents

Thank you for purchasing this JVC video cassette player. To
ensure optimum performance of this unit, please read this
instruction manual thoroughly.

Precautions ........................................................................... 2
Controls and terminals .......................................................... 3
Wireless remote control ........................................................ 4
Connections .......................................................................... 5
Setting the video channel ...................................................... 6
The video cassette ................................................................ 6
Playback ................................................................................ 7
Playback features .................................................................. 8
Karaoke features ................................................................... 9
Recording .............................................................................. 9
Editing ................................................................................. 10
Troubleshooting .................................................................. 10
Specifications ...................................................................... 11

Features

3 system (PAL/MESECAM/NTSC)

NTSC playback (on PAL television)

RF output G/K switchable

Digital auto tracking

HQ (High Quality)

Auto playback function

Repeat playback

Shuttle search

Still and slow motion

Line recording

Karaoke search

Automatic features

Auto power on
The video cassette player is automatically turned on when the
tape is inserted.

Auto rewind
The video tape is automatically rewound when the end of the
tape is reached during the play, recording or shuttle search
forward mode.

Auto playback
If the video cassette’s safety tab has been removed, playback
will begin automatically when the tape is inserted into the video
cassette player.

Power off eject
Even when the video cassette player’s power is off, pressing the
eject button will turn the power on and eject the tape. Once
ejected, the power will be turned off again automatically.

Auto head cleaning
When a tape is loaded or ejected the VCP video head is cleaned
automatically.

PAL NTSC

Summary of Contents for HR-P71K













Reviews: