JVC HR-P125EE Instructions Manual Download Page 11

11

Specifications

Format ................................ VHS Standard
Video recording system ..... Rotary, slant azimuth two-head

helical scan system

Rotary heads ...................... 2 video heads
RF output ........................... System G/K type modulation

UHF ch 32 – 40 adjustable (preset
ch 36)

Recording (line input) ......... PAL, SECAM (MESECAM tape)

NTSC 3.58, NTSC 4.43

Playback (line output) ........ PAL, SECAM (MESECAM tape)

NTSC 3.58
NTSC 4.43
Simulated PAL (NTSC tape)

Video

Line input level ................. 0.5 – 2.0 Vp-p/75 ohms, unbal-

anced

Line output level ............... 1.0 Vp-p/75 ohms, unbalanced
S/N ratio ........................... More than 45 dB
Horizontal resolution ........ More than 250 lines

(PAL/MESECAM)
More than 220 lines (NTSC)

Audio

Line input level ................. –8  dBm/50 k ohms, unbalanced
Line output level ............... –6 dBm/1 k ohm, unbalanced
Frequency response ........ 100 Hz to 10,000 Hz

Recording/Playback time

CCIR ................................ 240 min. with E-240 cassette
NTSC ............................... 160 min. with T-160 cassette

FF, REW time .................... Approx. 2 min. 30 sec. with E-180

cassette

Power requirements

Rating .............................. AC 110 – 240 V, 50/60 Hz
Operating ......................... AC 90 – 260 V, 50/60 Hz

Power consumption ........... 13 W

Operation temperature ....... 5

°

C to 40

°

C

Dimensions ........................ 400 (W) 

×

 94 (H) 

×

 265 (D) mm

Weight ................................ 3.4 kg

Standard accessories
Remote control unit ............................................................... 1
Batteries for remote control ................................................... 2
RF antenna cable .................................................................. 1

Design and specifications subject to change without notice.

Specifications shown are for SP mode unless otherwise
specified.

Summary of Contents for HR-P125EE













Reviews: