![JVC HR-J935EK Instructions Manual Download Page 15](http://html.mh-extra.com/html/jvc/hr-j935ek/hr-j935ek_instructions-manual_182233015.webp)
15
1
2
4
5
3
6
8
0
7
9
2
1
3
8
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FF
REW
C.RESET
ACTIVATE SCENE FINDER
1
Press SCENE FINDER. The recorder starts forward
search for 5 seconds and then fast-forwards 10 minutes
on the counter. This cycle is repeated until the end of
the tape is reached.
●
To start Scene Finder in the reverse direction, press
SCENE FINDER and then turn the TIME SCAN
SHUTTLE ring to the left (or press the REW button)
within 2 seconds. This cycle is repeated until the
beginning of the tape.
●
During Scene Finder, the following indications appear
on the display panel:
STOP SCENE FINDER
2
Press STOP.
NOTES:
●
During Scene Finder search, you can also hear the tape
sound. During fast forward or rewind, you hear the current TV
sound instead.
●
During Scene Finder, the sound can be heard regardless of
TIME SCAN AUDIO switch's setting.
●
Scene Finder does not function during Index Search.
This function helps you check contents of unlabeled recorded
tapes at the touch of a single button.
NOTE:
Scene Finder cannot be used when the recorder is in the Record
mode.
Scene Finder
10 minutes
on counter
FF
REW FF
REW FF
REW
Search
Search
Search
5 seconds
10 minutes
on counter
5 seconds
5 seconds
SCENE FINDER
STOP
Counter Memory
Returns to the counter reading of “0:00:00” to conveniently find
a specific place on the tape automatically.
SET COUNTER MEMORY
1
Press C. RESET during playback at a point you wish to
locate later. The counter reads “0:00:00”. Then press
C.MEMORY, and “M” appears in front of the counter
digits.
ACTIVATE COUNTER
MEMORY
2
When you wish to return to the designated point, press
STOP and then REW or FF.
●
The tape rewinds or fast-forwards and stops at about
0:00:00 automatically.
●
To cancel Counter Memory, press C.MEMORY again.
TIME SCAN SHUTTLE
STOP
REW
C. MEMORY
FF