32
EN
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART (AV) connector to
the recorder’s 21-pin SCART (AV) connector as
illustrated on page 33.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
.
. . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select depending on the
connector being used — “L-1” for the AV1 IN/OUT
connector, or “L-2” for the AV2 IN/DECODER connector.
●
When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (
Z
pg. 33).
SET EDIT MODE
3
See "Picture Control" on page 18.
START SOURCE PLAYER
4
Engage its Play mode.
START RECORDING DECK
5
Engage its Record mode.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
When you select EDIT to dub tapes in step 3, be sure to select
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
●
When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
Z
pg. 9).
1
2
3
4
5
6
7
8
9
0
2
4
1
3
?
NUMBER "0"
TV PROG
OK
MENU
EDITING (cont.)
