JVC HR-J7004UM Instructions Manual Download Page 13

Page: 13 / 48

Playback

Features

PLAYBACK AND RECORDING FEATURES

Still Picture/Frame-By-

Frame Playback

PAUSE DURING PLAYBACK

Press PAUSE. If there is vertical jitter, use the
CH

∞

button to correct the picture.

ACTIVATE FRAME-BY-

FRAME PLAYBACK

Press PAUSE repeatedly to advance one frame at a time.

Press PUSH JOG

™

repeatedly to advance

one frame at a time.
Press PUSH JOG

for forward frame by frame

playback or PUSH JOG

™

for reverse frame by

frame.

To resume normal playback, press PLAY.

Slow Motion/Reverse Slow

Motion

ACTIVATE SLOW-MOTION

PLAYBACK

During still picture, press and hold PUSH JOG

™

. Release to return to still picture.

For hands-free slow-motion, press PUSH JOG

™

during playback to decrease speed in the forward
direction. Continue to press

™

to select the various

slow motion, reverse slow motion, reverse play and
reverse search modes.

To resume normal playback, press PLAY.

NOTE:

If noise bars appear during slow motion, press CH

∞

a few

times to remove the noise bars from screen.

Variable-Speed Search/

Reverse Motion Playback

ACTIVATE VARIABLE-SPEED

During playback, press PUSH JOG

™

●

To increase the speed in the forward direction,
press

repeatedly to select the various forward

search modes.

●

To decrease the speed in the forward direction,
press

™

●

To play in reverse slow motion, and in reverse play
mode, continue to press

™

after selecting all the

forward slow motion modes.

To resume normal playback, press PLAY.

High-Speed Search

ACTIVATE HIGH-SPEED

During playback or still press FF for forward high-speed
search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, during playback or still press and hold FF or
REW for over 2 seconds. When released, normal playback
resumes.

™

REW

PLAY

PUSH JOG

™

PLAY

REW

PAUSE

PUSH JOG

™

Summary of Contents for HR-J7004UM
















































Search results

Summary of Contents for HR-J7004UM

Reviews:

Related manuals for HR-J7004UM

Brands by name

Popular brands

JVC HR-J7004UM, Instructions Manual

Search results

Summary of Contents for HR-J7004UM

Reviews:

Related manuals for HR-J7004UM

Brands by name

Popular brands