D
Perform Plug&Play setup
Plug the AC power cord into an AC outlet. Do not turn on the
VCR. The clock and tuner channels will be set automatically. The
time and date can be set automatically by the clock setting data
transmitted from one of the regular TV broadcast channels. We
call this TV channel the “host channel” and it is a PBS channel in
your area.
ATTENTION:
●
If you use a cable box, Plug&Play will not function; set the
clock and tuner channels separately.
To check the time, press the DISPLAY button or turn off the VCR.
What to do if Plug&Play setting failed
●
If an incorrect time is displayed on the display panel, perform
the “Semiauto Clock Set” or “Manual Clock Set” procedure.
●
If “–:– –” appears on the display panel, ensure that the antenna
cable is connected correctly. If Plug&Play setting is not
performed though the antenna cable is connected correctly,
perform “Manual Clock Set” and “Auto Channel Set” or
“Manual Channel Set”.
Set VCR channel
The VCR channel is the channel on which you can watch the picture
from the VCR on the TV when only using the RF connection. To reset
the VCR channel, perform the following steps:
A
Press
POWER
to turn off the VCR, then press
STOP/EJECT
(
0
) on the VCR for more than 5 seconds. “CH3” appears
on the display panel.
B
Press
CH+/–
on the Remote to select “CH3”, “CH4” or “CH–”
(OFF), then press
OK
.
●
The VCR channel is preset to “CH3”. Set to “CH4” if “CH3” is
used for broadcasting in your area.
E
Final preparation for use
Turn on the TV. Select the VCR channel 3 or 4 (or AV mode) on
the TV. You can now perform basic playback or basic recording.
●
If you connect the TV and the VCR only using the RF
connection, press
TV/VCR
on the Remote so that the VCR mode
indicator lights on the display panel.
Initial Settings
Language Setting
The default setting is “ENGLISH”.
A
Access Main Menu screen, then
Initial Set screen
Press
MENU
on the Remote. Press
rt
to
move the highlight bar (arrow) to “INITIAL
SET”, then press
OK
or
e
.
B
Select language
This VCR offers you the language choice to
view menus and some messages — in
English, Spanish or French. Press
rt
to
move the highlight bar (arrow) to
“LANGUAGE”, then press
OK
or
e
repeatedly until the desired language is
selected.
Press
MENU
to return to normal screen.
Clock Setting
Perform clock setting only if the clock has not been set correctly
by the Plug&Play setting or if you use a cable box.
Preparations
A
Access Main Menu screen, then
Initial Set screen
Press
MENU
on the Remote. Press
rt
to
move the highlight bar (arrow) to “INITIAL
SET”, then press
OK
or
e
.
B
Access Clock Set screen
Press
rt
to move the highlight bar (arrow)
to “CLOCK SET”, then press
OK
or
e
.
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps
1
to
2
in
“Preparations” above, then go to the following steps.
NOTE:
●
The time set previously will be erased when “AUTO CLOCK”,
“HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.
A
Set Auto Clock to ON
Press
OK
or
e
on the Remote repeatedly
to move the highlight bar to “AUTO
CLOCK”, then press
rt
so that “ON” is
selected.
B
Select host channel
You can either select “AUTO” or enter a PBS channel number.
Press
OK
or
e
to move the highlight bar to “HOST CH”, then
press
rt
repeatedly until “AUTO” or the desired PBS channel
number is selected.
During Initial Auto Clock Set
“Aut” blinks.
During Auto Channel Set
The channel numbers are displayed as they are
scanned and set.
During VCR Channel Set
Channel No. “3” blinks.
A
Press
POWER
to turn on the VCR.
B
Press
CH+/-
on the Remote to select CH”3”,
“4” or “–” (off), then press
OK
.
●
Inserting a cassette during VCR channel
set will cause the VCR to turn on
automatically and VCR channel set fails.
So you have to perform VCR channel set
manually. Press
STOP/EJECT
button on the
VCR to eject the tape. Then, do step
1
–
2
in “Set VCR channel” below.
●
If a cassette is already in during VCR
channel set and you press the
STOP/EJECT
button on the VCR, the VCR will turn on,
eject the tape and turn off. In this case,
VCR channel set will continue. Perform
step
1
–
2
above.
Plug&Play Completed
The received channel number is displayed.
The VCR channel will be reset to “CH3” after a power failure
occurs.
Language selection will be reset to “English” after a power
failure occurs.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE
ENGLISH
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE
ENGLISH
GUIDE CHANNEL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME
DATE YEAR
1:00PM
12/24 02
TUE
AUTO CLOCK : ON
HOST CH
: AUTO
(CATV)
D.S.T.
: AUTO
TIME ZONE
: AUTO
– Connections and Plug&Play Setting –
