Page 8
May 22, 2001 9:10 am
Timer Recording
Up to 8 timer recording programs can be made using Express
timer programing method as far as a year in advance. Remember,
the clock must be set before you can program the timer.
NOTES:
●
If all the 8programs have already been set, “PROGRAM FULL”
appears on the TV screen.
●
After timer recording is completed, the recorder turns off
automatically.
●
You can program the timer recording while a regular recording
is in progress; the menu screens will not be recorded.
●
In case of a power failure after programming, the recorder’s
memory backup keeps your selections (if the lithium battery is
not exhausted).
Express Timer Programing
●
Remember, the clock must be set before you can program the
timer.
●
Load a cassette with the record safety tab intact. The recorder
turns on, and the counter is reset, automatically.
●
Select the appropriate colour system with “PAL/MESECAM” and
“NTSC” in Function settings.
A
Press
PROG
on the remote control to access the Program
screen.
B
Press
START+/–
,
STOP+/–
,
DATE+/–
or
PR+/–
repeatedly to enter the start
time, stop time, date or channel.
●
Press and hold
START+/–
or
STOP+/–
to increase the time in
30-minute intervals.
●
To set the tape speed, press
SP/LP/
EP
(
p
).
●
To timer-record daily (Monday–Friday) or weekly serials,
press
DAILY
or
WEEKLY
. Pressing the button again makes the
“DAILY” or “WEEKLY” display disappear.
At the programme check screen...
When the weekly serials are programmed, a day of the week
appears. When the daily serials are programmed, “DAILY”
appears.
C
Press
OK
or
PROG
.
●
If “PROGRAM OVERLAPPED” appears, see “Program
overlap warning display”.
D
Press
#
. The recorder turns off automati cally and “
#
” is
displayed on the display panel.
●
When a tape reaches its end during timer recording, the
recording stops and "
#
" , "
o
" and "
e
" blinks on the display panel.
To use the recorder while it is in
timer recording standby mode
Press
#
, then press
1
. After you use the recorder, press
#
again
to put the recorder into timer recording standby mode.
Checking, canceling or changing
program settings
A
Disengage timer
Press
#
, then press
1
.
●
When “AUTO TIMER” is set to “ON”, you do not have to press
#
.
B
Access Program Check screen
Press
"
.
C
Access Program screen
Press
"
again. Each time you press
"
,
the next program’s Program screen
appears.
D
Cancel or change program setting
To cancel a program,
press
&
when the Program screen you do
not want is shown.
To change a program,
press the appropriate button:
START+/–
,
STOP+/–
,
DATE+/–
,
PR+/–
, and/or
SP/LP/EP
(
p
) when the
Program screen on which you want to make changes is shown.
E
Return to normal screen
Press
"
repeatedly until no Program screen is shown.
F
Reengage timer recording standby mode
Press
#
. The recorder turns off automatically and “
#
” is displayed
on the display panel.
●
When “AUTO TIMER” is set to “ON”, the timer recording
standby mode automatically resumes when you turn off the
recorder.
[+/–]
[PROG] : EXIT
–
P1 –
START
STOP
21:00
–:– –
SP
DATE
TV PROG
– –.– –
– –
[ ] : NEXT
PR
START
STOP
CH
DATE
1
8:00
10:00
3
24.04
2
10:00
10:45
2
25.04
3
11:30
13:00
1
25.04
4
5
6
7
8
[ ] : NEXT
– P1 –
START
STOP
8:00
10:00
SP
DATE
TV PROG
24.04
3
HR-J481MS-EN.fm Page 8 Tuesday, May 22, 2001 9:12 AM