JVC HR-J260EU, Instructions Manual

Page: 6 / 44

6
EN
INITIAL SETTINGS (cont.)
Preset
Download
1 2 3
4 5 6
7 8 9
0
2
4
1
3
?
OK
When you connect the recorder and your TV via fully-wired
21-pin SCART cable (
Z
pg. 3), you can set the recorder's tuner
channels by downloading preset data from your TV instead of
using the Auto Set Up function (
Z
pg. 4).
PERFORM PRESET DOWNLOAD
1
Press MENU.
If you are referring to the front display panel
Press
%fi
to select "CH – –" and press OK or
#
.
If you are referring to the on-screen display
Press
%fi
to move the
highlight bar (pointer) to
"T-V LINK" and press OK
or
#
.
Preset position on the display panel increases from
"CH1"; do NOT press any button on the recorder or
remote control.
●
If you are using the on-
screen display, the T-V
LINK screen will appear.
●
If you press any button
on the recorder or
remote control while
downloading is in
progress, it will be
interrupted.
SET VIDEO CHANNEL
2
Set the Video Channel to off manually. (
Z
pg. 35)
T-V LINK
PLEASE WAIT
[MENU] : EXIT
AUTO SET
T-V LINK
[
5∞
]
=
[MENU] : EXIT
NOTES:
●
If there is a power cut, or if you press or MENU while
downloading or set up is in progress, it will be interrupted; be
sure to turn off the recorder power once and try again from the
beginning.
●
When you perform T-V LINK function, be sure to use fully-
wired 21-pin SCART cable.
●
On this recorder, the characters available for station’s name
(ID) are A–Z, 0–9, –,
*
, + and (space). Some downloaded
station’s name may differ from those of your TV (
Z
pg. 31).
Perform steps 1 to 4 of "Auto Set Up" on page 4 and 5 before
continuing.
You can use this function only with the TV offering
T-V Link, etc.*
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NEXTVIEWLINK via fully-
wired 21-pin SCART cable. The degree of compatibility and
available functions may differ by system.
MENU