JVC HR-J255EA, Instructions Manual

Page: 20 / 40

20
EN
1 2 3
4
0
6
7 8
5
9
1
4
3
2
G-CODE
1 2 3 4 5 6 7 8
[0 – 9]
=
[CANCEL] : DELETE
[PROG] : EXIT
ACCESS G-CODE SCREEN
1
Press PROG. .
ENTER G-CODE NUMBER
2
Press the NUMBER keys to
enter the G-
CODE
number
of a programme you wish
to record.
●
If you make a mistake,
press
CANCEL and input
the correct number.
ACCESS G-CODE
PROGRAM SCREEN
3
Press OK , and the G-
CODE
Program screen appears (if
you’re just starting out,
“P1” appears).
IMPORTANT
Make sure the channel position number you wish
to record is displayed; if not, see "G-
CODE
Setup" on
page 18 and set the Guide Program number for that
G-
CODE
number correctly.
●
If the number you entered is invalid, "ERROR" appears
on the screen and "Err" appears on the display panel.
Press
CANCEL and input a valid G-
CODE
number.
●
If the "GUIDE PROG SET" screen appears, see
"ATTENTION – Regarding Guide Program Number
Set" on page 21.
SET TAPE SPEED
4
Press SP/LP ( ) to set the tape speed.
– P1 –
G-CODE 123456789
START STOP
21:00
=
22:00
SP
DATE TV PROG
25.12 1
: OK
G-
CODE
Timer
Programming
Before performing G-
CODE
Timer Programming:
●
Be sure to read "G-
CODE
Setup" (
Z
pg. 18).
●
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
●
Turn on the TV and select the VIDEO channel (or AV mode).
With G-
CODE
, timer programming is greatly simplified because
each TV programme has a corresponding code number which
your recorder is able to recognise.
TIMER RECORDING (cont.)
G-CODE
[0 – 9]
=
[+/–] : EXPRESS PROGRAMING
[PROG] : EXIT
NUMBER
CANCEL
PROG.
OK
SP/LP