JVC HR-DD949E, Instructions Manual

Page: 14 / 60

14
EN
Manual Tracking
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG. buttons.
OVERRIDE AUTOMATIC
TRACKING
1
Press SP/LP ( ) on the remote to engage manual
tracking.
ADJUST TRACKING
MANUALLY
2
Press TV PROG. + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press SP/LP ( ) on the remote to re-engage auto-
matic tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
5 / 8
¡ 1
8
q
6
1 2
4 5
3
6
8
0
7 9
2
4
1
3
REW
FF
TV PROG.
PLAYBACK (cont.)
PLAY
3R Picture
3R(= Resolution and Response Recovery technology) maximises
sense of resolution and sharpens image edges to make playback
picture look better focused.
ACTIVATE 3R PICTURE
1
Press 3R PICTURE. The button will light.
●
To turn off 3R Picture, press 3R PICTURE again so
that the light goes off.
●
Normally it is recommendable to keep 3R Picture ON
(with the button lit).
●
Depending on the type of tape used, picture quality
may be better with 3R Picture set to off.
●
If you use this recorder as the player for editing, be
sure to turn off 3R Picture before starting.
●
The setting will remain effective even though you
turn on/off the recorder.
Information On Colour
System
You can also record SECAM signals, or play back a MESECAM
tape on this recorder. When a MESECAM tape is played back,
"MESECAM" appears on the screen for about 5 seconds.
MESECAM is the designation for tapes with SECAM signals that
have been recorded on a MESECAM-compatible PAL video
recorder.
3R PICTURE
TV PROG.
PLAY
FF REW
REVIEW
PUSH JOG