JVC HD-52G657 User Manual Download

Page: 63 / 88

Button Functions

The R

ETURN

+/TV button has three functions:

Return

- Returns to the channel viewed just before the channel currently onscreen.

- Lets you program a specific channel to return to while scanning through the

channels using the CH+ and CH– buttons.

- Returns to the TV mode.

Press the R

ETURN

+/TV and hold for three seconds

The channel currently active has been programmed as your channel. Now scan

through the channels using the C

HANNEL

+/– buttons.

Press the R

ETURN

+/TV

You will return to your programmed channel.

• To cancel your channel, press and hold the R

ETURN

+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• works only with the /– buttons. Pressing any number key will cancel

/TV

RETURN CHANNEL

PROGRAMMED!

By pressing the S

OUND

button, you can change the A.H.S.+ (Advanced Hyper Surround plus)

mode, A.T.C. (Advanced Tone Correction), SMART SOUND and HYPER BASS on or off.

A.H.S.+ -

Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.

A.T.C. -

Reproduces distinctive sounds with tone correction.

SMART SOUND -

Decreases high sound levels, giving a regulated sound level.

HYPER BASS -

Increases bass levels, giving a richer, deeper bass.

Press the S

OUND

button

†

To select A.H.S.+, A.T.C., SMART SOUND or
HYPER BASS

√

To choose the setting

Press the M

ENU

when finished

Sound

SOUND EFFECT

SELECT OPERATE EXIT

A.H.S.+

A.T.C.

SMART SOUND

HYPER BASS

MOVIE MUSIC OFF

ON OFF

Notes:

• Smart Sound may become an unnatural effect, depending on the signal source.
• You can adjust BALANCE only when A.H.S.+ is off.

LCT2061-001C-A ENG.indd 63

12/15/06 10:48:30 AM

Summary of Contents for HD-52G657

























































































Search results

Summary of Contents for HD-52G657

Reviews:

Related manuals for HD-52G657

Brands by name

Popular brands

JVC HD-52G657, User Manual

Search results

Summary of Contents for HD-52G657

Reviews:

Related manuals for HD-52G657

Brands by name

Popular brands