JVC GZMC100 - Everio 2MP 4 GB Microdrive Camcorder, Instructions Manual

Page: 26 / 69

26
EN
MENU SETTINGS
You can change the menu settings to customize your
camera. Access the desired menu screen by following the
steps below, then change the various settings.
1
Select the operation mode.
For Recording Menus:
Set the power switch to while pressing down the lock
button located on the switch.
For Playback Menus:
Set the power switch to while pressing down the lock
button located on the switch.
2
Press MODE to select (video), (still image) or
(voice).
3
Press MENU . The menu screen appears.
4
Select the desired sub menu and menu item with
rt
and
49
.
●
To return to the normal screen, press MENU .
●
To display the operation guide, press INFO when the menu
screen is displayed.
[ ] = Factory-preset
BASIC SETTING
EXECUTE : Resets all settings to the factory-preset.
[CANCEL] : Returns to menu screen without executing
reset.
OFF : Disables the function.
[ON] : Activates demonstration mode and shows various
features on the display.
OFF : Turns off operation sound.
BEEP : The beep sounds when the power is turned on or
off, and at the beginning and end of recording.
[MELODY] : Instead of a beep, a melody sounds when any
operation is performed.
Changing the Menu Settings
Power Switch
Lock Button
MODE
49
INFO
MENU
r
w
t e
NOTE:
Information on the following pages (
墌
pg. 26 – 31) are only
excerpts of menu settings.
Refer to the advanced operation manual in the CD-ROM for
the full descriptions. (
墌
pg. 32)
Common Menus for All Modes
PRESET
DEMO MODE
OPERATION
SOUND