– 28 –
MasterPage: Body
11
Enter the Macintosh Administrator name
and password in [Name] and [Password]
respectively, and click [OK].
Finish Up screen appears.
●
If you are not the owner, this screen will not be
appeared.
12
Click [Close] after you will confirm the
message that tells you the installation has
been completed.
13
Click [Close] when the installation is
finished and eject the CD-ROM.
Connect the USB cable to copy still images and
video files in a recording medium to the PC.
1
To assure safety, make sure all units are
turned off before making any connections.
2
Use the USB cable to connect the camera
to the PC.
NOTES:
●
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
●
When the USB cable is connected, turning on or off
the camera causes malfunctions of the PC.
●
Connect the camera directly to the PC, not through
the hub.
●
Do not use an extension USB cable.
Connections (Macintosh)
Camera
To USB connector
PC
To USB connector
USB cable
M5E3_InstallGuide.book Page 28 Tuesday, August 9, 2005 3:18 PM
