JVC GZ-MG130AA Instructions Manual Download

Page: 55 / 60

ENGLISH

Cleaning

Before cleaning, turn off the camera and remove the battery pack and AC adapter.

To clean the exterior

Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild
soap and wring it out well before wiping. Then wipe again with a dry cloth.

To clean the LCD monitor

Wipe gently with a soft cloth. Be careful not to damage the monitor.

To clean the lens

Wipe gently with lens cleaning paper.

NOTES

•

Avoid using strong cleaning agents such as benzine or alcohol.

•

Mould may form if the lens is left dirty.

•

When using a cleaner or chemically treated cloth, refer to the cautions for each product.

Indication

Meaning/Action

RECORDING MAY NOT
BE CORRECT ON THE
MEMORY CARD

•

The data may not be recorded on the recording medium

correctly. Try recording again.

•

Otherwise, clean up the recording medium.

–

DROP DETECTION
WORKED AND THE
POWER IS TURNED
OFF

•

To turn the unit on again, set the power/mode switch to

OFF

, and to

again.

–

Summary of Contents for GZ-MG130AA





























































Search results

Summary of Contents for GZ-MG130AA

Reviews:

Related manuals for GZ-MG130AA

Brands by name

Popular brands

JVC GZ-MG130AA, Instructions Manual

Search results

Summary of Contents for GZ-MG130AA

Reviews:

Related manuals for GZ-MG130AA

Brands by name

Popular brands