16
Be sure to confi gure the following three
settings before use.
Charging the Battery Pack
1
Set the power/mode switch to OFF.
Slide while pressing down the lock button.
OFF
(CHARGE)
2
Attach the battery pack.
Slide the battery pack down until it locks
in place.
BATT.
3
Connect the AC adapter.
* If the provided AC adapter is AP-V14E,
connect the power cord to the AC adapter,
and plug the power cord into an AC outlet.
•
The access/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
fi nished. Unplug the AC adapter (or
the power cord) from the AC outlet and
disconnect the AC adapter from the camera.
Required charging / recording time
(approx.)
Battery pack Charging time
Recording
time
BN-VF815U
(Provided)
2 hr. 40 min.
1 hr. 20 min.
(1hr. 25 min.*)
BN-VF823U
3 hr. 50 min.
2 hr. 00 min.
(2 hr. 10 min.*)
* When using the viewfi nder.
8
To detach the battery pack
Slide and hold
BATT
. (
step
2
), then
remove the battery pack.
8
To check the remaining battery power
See page 18.
NOTES
•
You can also use the camera with just the
AC adapter.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Set Lever
Power/Mode
Switch
Access/Charge
Lamp
DC Connector
AC Adapter
(ex. AP-V17E)*
To AC Outlet
(110V to 240V)
Necessary Settings before Use
