JVC GY-LS300CHE Instructions Manual Download

Page: 46 / 188

Press the [REC] button to start recording to

the SD card.

This camera recorder has two [REC] buttons.

Any of the [REC] buttons can be used to start/

stop recording by default.

The tally lamp lights up in red during recording.

Zoom Operation

Adjusting the Focus

Memo :

If both the slots are loaded with recordable cards

in the factory default, pressing the [REC] button

starts recording only to the media in the selected

slot.

When [Main Menu]

[System]

[Record Set]

[Slot Mode] is set to “Dual”, recording can be

performed simultaneously to the cards in both

the slots.

(

P75 [Dual Rec] )

The tally lamp can be turned off in [System]

[Tally Lamp].

(

P115 [ Tally Lamp ] )

Check the most recently captured images.

Press the [C.REVIEW/4] button to activate

the Clip Review function. The most recently

captured images are played back on the LCD

monitor and viewfinder screen.

After playback, the camera recorder returns

to standby mode (STBY).

(

P74 [Viewing Recorded Videos

Immediately (Clip Review)] )

Memo :

[Clip Review] is assigned to the [C.REVIEW/4]

button in factory default.

[Clip Review] can also be assigned to other user

buttons.

(

P38 [Assignment of Functions to User

Buttons] )

Selecting System

Definition, File Format and

Video Format

You can select the resolution of the recorded

videos (4K, HD, SD, or Web), file format for

recording/playback, and the video recording

format on this camera recorder.

Setting the Record Format Menu

Set [System], [Format], [Resolution],

[Frame Rate] and [Bit Rate] in [Main Menu]

[System]

[Record Set]

[Record

Format].

Set each of the items.

[Selecting a System Definition] (

P 46)

[Selecting a File Format] (

P 47)

[Selecting a Video Format] (

P 47)

[Selecting the Aspect Ratio of SD Videos]

(

P 48)

After setting is complete for all items, press

the [LOLUX/3] button.

The recording format is switched.

A “Please Wait...” message appears on the

screen during switching.

Selecting a System Definition

There are four different definitions for selection.

4K:

Records in 4K resolution (3840x2160)

HD:

Records in HD (High Definition) resolution

(1920x1080 or 1280x720)

SD:

Records in SD (Standard Definition) resolution

(720x480 or 720x576)

Web:

Records in resolution (1440x1080, 960x540,

720x480, 720x576, or 480x270) suitable for web

distribution

You can select a definition for the recorded images

from the following items under [System].

4K:

Records in 4K quality for both slots A and B.

HD:

Records in HD quality for both slots A and B.

SD:

Records in SD quality for both slots A and B.

HD+Web:

Records in HD quality for slot A, and Web quality

for slot B.

(

P75 [Recording Simultaneously at Two

Different Definitions] )

Basic Shooting Procedures

ooting

Summary of Contents for GY-LS300CHE





























































































































































































Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands

JVC GY-LS300CHE, Instructions Manual

Search results

Summary of Contents for GY-LS300CHE

Reviews:

Related manuals for GY-LS300CHE

Brands by name

Popular brands