JVC GY-HM790U, Service Manual, Page: 25 / 31

(No.HC034<Rev.001>)1-25
Refer to 5.1.5 ADVANCED FUNCTION Menu because the oper-
ations are almost the same.
(Bold is the factory setting.)
*1 This mode is automatically set to ON when the power is
turned ON.
The OFF mode is enabled only after it is set to OFF on this
screen until the power is turned OFF.
5.1.7 DIP SW Menu Operation
(1) Refer to 5.1.2.3 to display the SERVICE MENU.
(2) Move the cursor to [DIP SW], then press the [Set] button or
the [Cross-Shaped] button (right).
(3) The DIP SW MAIN Menu is displayed.
Item Parameter
PIXEL
COMPEN
*1 OFF Does not correct the detected white
blemish.
ON Corrects the detected white blemish.
CHECK Light up the pixels which are the de-
tected white blemish.
TEST
SIGNAL OFF No output test signal.
OXYGEN Outputs OXYGEN (FPGA8) signal.
AE TEST R , RAMP1, FRONT BAR,
CENTER, AE TEST G, LR REVSE,
RAMP+REF, VTRANS, AE TEST B,
HS MARK, HOB MARK, REAR BAR
FLUORINE Outputs FLUORINE (FPGA9) signal.
Y RAMP , C RAMP, SWEEP H,
SWEEP V, 24PMOVING, TEST
BAR, SECRET
NEON Outputs NEON (FPGA10) signal.
Y RAMP , C RAMP, SWEEP H,
SWEEP V, TEST BAR, MOVING,
FRAME
RM DC
DISP OFF When connecred with RM-HP250,
the voltage of power is not displayed.
ON When connecred with RM-HP250,
the voltage of power is displayed.
ANTON
SHUT
DOWN 12.0V Setting of the ANTON battery voltage
when shutdown should occur. Set-
ting in 0.1V steps between 12.0V and
14.0V.
ANTON
ALARM 12.8V Setting of the ANTON battery voltage
when the battery alarm indicated.
Setting in 0.1V steps between 12.0V
and 14.0V.
IDX SHUT
DOWN 12.0V Setting of the IDX battery voltage
when shutdown should occur. Set-
ting in 0.1V steps between 12.0V and
14.0V.
IDX ALARM 12.5V Setting of the IDX battery voltage
when the battery alarm indicated.
Setting in 0.1V steps between 12.0V
and 14.0V.
--- DIP SW MAIN ---
DIPSW ALL RESET CANCEL
DIP SW 0-7..
DIP SW 8-15..
DIP SW 16-23..
DIP SW 24-31..
DIP SW 32-39..
DIP SW 40-47..
DIP SW 48-55..
DIP SW 56-63..
BACK
--- DIP SW 1/8 ---
DIP SW 0 0
DIP SW 1 OFF
DIP SW 2 OFF
DIP SW 3 OFF
DIP SW 4 OFF
DIP SW 5 OFF
DIP SW 6 OFF
DIP SW 7 OFF
BACK
--- DIP SW 2/8 ---
DIP SW 8 OFF
DIP SW 9 OFF
DIP SW 10 OFF
DIP SW 11 OFF
DIP SW 12 OFF
DIP SW 13 OFF
DIP SW 14 OFF
DIP SW 15 OFF
BACK
--- DIP SW 3/8 ---
DIP SW 16 OFF
DIP SW 17 OFF
DIP SW 18 OFF
DIP SW 19 0
DIP SW 20 OFF
DIP SW 21 0
DIP SW 22 OFF
DIP SW 23 OFF
BACK
--- DIP SW 4/8 ---
DIP SW 24 0
DIP SW 25 OFF
DIP SW 26 OFF
DIP SW 27 OFF
DIP SW 28 OFF
DIP SW 29 OFF
DIP SW 30 OFF
DIP SW 31 0
BACK