JVC GY-HM150U, Instructions Manual

Page: 69 / 104

65
Audio Set Menu
* Default values are indicated in bold characters.
* Default values are indicated in bold characters.
Item Setting Values Function
Input1 Mic Wind
Cut
On
Off
For selecting whether to cut the low fre q uencies of the audio input signals (low-cut).
Set this item to reduce wind noise from the microphone.
On
: Enables low-cut on the audio.
Off : Disables low-cut on the audio.
Input2 Mic Wind
Cut
Internal Mic Wind
Cut On
Off
For selecting whether to cut the low fre q uencies of the audio input signals (low-cut) from the
built-in microphone. Set this item to reduce wind noise from the microphone.
On
: Enables low-cut on the audio.
Off : Disables low-cut on the audio.
Audio Ref. Level -20dB
-12dB
For setting the audio reference level to be recorded to the SDHC/SDXC card. (Applies to
both [CH-1/CH-2].)
-20dB : Outputs signals of the reference level when the meter is at -20 dBFS.
-12dB : Outputs signals of the reference level when the meter is at -12 dBFS.
Internal Mic Level
-2, -1
Normal
1, 2
For setting the input level from the built-in microphone.
Camera Function Menu
Item Setting Values Function
Bars On
Off
For setting whether to output color bars.
On
: Color bars are output.
Off : Color bars are not output.
Memo :
●
When in the Full Auto shooting mode, this item is fixed at
A
Off
B
and cannot be selected.
●
This item is selectable when [System Definition] in the [Record Format] menu is set to
A
HD (MPEG2)
B
. When
A
SD (DV)
B
is set, this item is fixed at
A
Off
B
. (
A
Page 6 3 )
●
The menu closes when the setting is changed from
A
Off
B
to
A
On
B
.
●
When the menu screen is opened while [Bars] is set to
A
On
B
, this item switches to
A
Off
B
automatically.
Tele Macro On
Off
For selecting whether to set tele macro which shortens the closeup distance at the tele (T)
end of the zoom lens. (
A
Page 3 7)
On : This is the tele macro setting. Enables closeup shots up to about 8 0 cm.
Off : This is the normal setting. Enables closeup shots up to about 1 m.
AE Area
^
For setting the area for brightness correction. (
A
Page 3 6)
Memo :
●
When in the Full Auto shooting mode, this item cannot be selected.
Switch Set... For specifying the switch settings of the camera recorder. (
A
Page 66)
GY-HM150U.book Page 65 Monday, September 5, 2011 1:48 AM