JVC GY-HM150U, Instructions Manual

Page: 41 / 104

37
Applicable to: Manual shooting mode
M
Displays the color bars on the screen and starts recording.
(See below)
1
Set to the Manual shooting mode.
2
Display the color bars.
There are two ways to display the color bars.
A
Set [Bars] in the [Camera Function] menu to
A
On
B
.
(
A
Page 65)
B
Assign the color bars function to a user button and press
the button. (
A
Page 19, 66 )
* Set [Main Menu]
B
[Camera Function]
B
[Switch
Set]
B
[USER1]/[USER2]/[LOLUX/ 3 ]/[C.REVIEW/4]/
[ZEBRA/5]/[REC/6] to
A
Bars
B
. (
A
Page 66)
●
The color bars appears.
Memo :
●
The color bars will not appear when in the Full Auto
shooting mode, when the [Program AE] selection screen
is displayed, and when [System Definition] is set to
A
SD
(DV)
B
.
Clearing the color bars display
1
Set [Bars] in the [Camera Function] menu to
A
Off
B
.
Alternatively, press the user button that is set as
A
Bars
B
.
Memo :
●
You can also cancel the color bars display by performing
the following operations.
•
Open the menu screen.
•
Set to a mode other than Camera mode.
Applicable to: Full Auto shooting mode
A
, Manual shooting
mode
M
The picture q uality of the camera can be set using the
[Camera Process] menu.
As the adjustments are shown on the screen, you can adjust
the values while checking the picture
q uality on the camera.
●
[Detail]
●
[Knee]
●
[Gamma]
●
[Color Matrix]
●
[Color Gain]
Memo :
●
For details of the respective items, see the [Camera
Process] menu. (
A
Page 67)
Applicable to: Full Auto shooting mode
A
, Manual shooting
mode
M
Reduces blurring of images due to camera shake.
1
Check whether the image stabilizer feature is turned ON
or OFF.
●
Image stabilizer OFF icon on status display: Image
stabilizer feature OFF
●
No image stabilizer OFF icon on status display: Image
stabilizer feature ON
2
Press the [OIS] button to turn ON the image stabilizer
feature.
(when image stabilizer feature is OFF)
●
The image stabilizer feature switches between ON and OFF
with every press of the [OIS] button.
•
OFF : Use this setting when the camera recorder is
secured, such as when using a tripod.
•
ON : Reduces blurring of images due to camera shake.
Memo :
●
Correction by this feature may not be sufficient when
camera shake is too strong.
Displaying the Color Bars
Recording the color bar
When the [Camera Resolution], [Frame & Bit Rate] menu is
as below, the color bar can be recorded.
[Camera
Resolution]
[Frame & Bit Rate]
1920x10 8 0 60i(HQ), 3 0p(HQ), 50i(HQ), 25p(HQ),
24p(HQ)
12 8 0x720 60p(HQ), 60p(SP), 3 0p(HQ), 3 0p(SP),
50p(HQ), 50p(SP), 25p(HQ), 25p(SP),
24p(HQ), 24p(SP)
Adjusting the Camera Image
Using the Image Stabilizer
OIS
GY-HM150U.book Page 37 Monday, September 5, 2011 1:48 AM