background image

3

PRECAUTIONS

SAFETY PRECAUTIONS

Cassettes marked 

 and 

 can be used with this camcorder.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:      TO REDUCE THE RISK OF ELECTRIC SHOCK,

       DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated "dangerous voltage" within the 
product's enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.

WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.

CAUTIONS

• This camcorder is designed to be used with

NTSC-type color television signals. It cannot be
used for playback with a television of a different
standard. However, live recording and LCD
monitor/viewfinder playback are possible any-
where.

• Use the JVC BN-V11U/V12U/V20U/V400U

battery packs and, to recharge them or to supply
power to the camcorder from an AC outlet, use
the provided multi-voltage AC Adapter.
(An appropriate conversion adapter may be
necessary to accommodate different designs of
AC outlets in different countries.)

NOTES:

• The rating plate (serial number plate) and safety

caution are on the bottom and/or the back of the
main unit.

• The rating information and safety caution of the

AC Adapter are on its upper and lower sides.

ATTENTION:

The product that you have purchased is powered
by a rechargeable battery. The battery is
recyclable. At the end of its useful life, under
various state and local laws, it may be illegal to
dispose of this battery into the municipal waste
stream. Check with your local solid waste officials
for details in your area for recycling options or
proper disposal.

This product has a fluorescent lamp that
contains a small amount of mercury. Disposal of
these materials may be regulated in your
community due to environmental considerations.
For disposal or recycling information please
contact your local authorities, or the Electronics
Industries Alliance:

<http://www.eiae.org>

 GR-SXM755_EN

11/8/02, 3:05 PM

3

Summary of Contents for GR-SXM750

































Reviews: