background image

 

3

 

SAFETY PRECAUTIONS

 

To avoid electrical shock or damage to the 
unit, first firmly insert the small end of the 
power cord into the AC Adapter until it is no 
longer wobbly, and then plug the larger end 
of the power cord into an AC outlet.

 

• If you notice smoke or a peculiar smell

coming from the camcorder or AC adapter,
shut it down and unplug it immediately.
Continue using the camcorder or AC
adapter under these conditions could lead to
fire or electric shock. Contact your JVC
dealer. Do not attempt to repair the
malfunction yourself. 

• To prevent shock, do not open the cabinet.

No user serviceable parts inside. Refer
servicing to qualified personnel. 

• When you are not using the AC Adapter for a

long period of time, it is recommended that
you disconnect the AC Adapter from AC
outlet.

• The socket outlet shall be installed near the

equipment and easily accessible, or the
mains plug or an appliance coupler shall
remain readily operable.

• In certain areas, use the conversion plug

depending on the type of your AC wall outlet.

 

NOTES:

 

• The rating plate (serial number plate) and

safety caution are on the bottom and/or the
back of the main unit. 

• The rating information and safety caution of the

AC Adapter are on its bottom.

• This camcorder is designed to be used with

PAL-type color television signals. It cannot
be used for playback with a television of a
different standard. However, live recording
and LCD monitor viewfinder playback are
possible anywhere. 

• Use the JVC BN-V10U/ V12U/ V20U/ V400U

battery packs and, to recharge them or to
supply power to the camcorder from an AC
outlet, use the provided multi-voltage AC
Adapter. (An appropriate conversion adapter
may be necessary to accommodate different
designs of AC outlets in different countries.)

 

SAFETY PRECAUTIONS

 

WARNING: 

 

TO PREVENT FIRE OR SHOCK HAZARD, 
DO NOT EXPOSE THIS UNIT TO RAIN OR 
MOISTURE.

CAUTIONS

 

 

 

CAUTIONS

 

 

 

CAUTIONS

 

 

 

When the equipment is installed in a cabinet
or on a shelf, make sure that it has sufficient
space at least 10 cm on all sides to allow
ventilation. 
Do not block the ventilation holes. 
No naked flame sources, such as lighted
candles, should be placed on the apparatus. 
When discarding batteries, environmental
problems must be considered and the local
rules or laws governing the disposal of these
batteries must be followed strictly. 
Prevent water or liquid from entering this
equipment, keep it away from wet places.

 

CAUTION: 

 

The mains plug shall remain readily
operable.

Only cassettes marked 

 and 

 can be used with this camcorder. 

However, S-VHS recordings are possible only with cassettes marked 

 

GR-SXM303AS-EN.fm  Page 3  Tuesday, May 23, 2006  11:19 AM

Summary of Contents for GR-SXM303AS

























Reviews: