background image

12

BASIC FEATURES

Snapshot 

(GR-SXM87ED only)

You can record still images that look like
photographs onto a tape.
1) Perform step 1 of “RECORDING” (

 

pg. 11).

2) Press SNAPSHOT 

2

.

• There is a momentary camera shutter-type

blackout together with the sound effect of a
shutter closing.

• Snapshot is also available during playback.

However, the shutter sound is not heard.

Picture Stabiliser

To compensate for unstable images caused by
camera-shake, particularly at high magnification.
1) Press P. STABILIZER 

4

 

!

 appears.

2) To switch off the Picture Stabiliser, press

P. STABILIZER 

4

 

!

 

disappears.

• Accurate stabilisation may not be possible in

certain conditions including excessive hand
shake.

 

!

 appears blinking if the Stabiliser cannot be

used.

• This function cannot be activated during the

“Night-Scope”, “CLASSIC FILM”, “STROBE” and
“VIDEO ECHO” modes (

 

pg. 23,

 

“Digital

Effects”).

5Sec. Rec (5-sec. Recording)

(GR-SXM67ED/SX37ED only)

To record a scene for 5 seconds, providing quick
scene transitions like those seen in TV
programmes.
1) Make sure the recording mode is set to “SP”.
2) During Record–Standby, press 5SEC. REC 

2

.

 5S 

@

 appears and 5Sec. Rec is reserved.

3) Press the Recording Start/Stop Button 

!

.

Recording starts, and after 5-second recording
is finished, the camcorder reenters the Record–
Standby mode automatically.

4) To cancel the 5Sec. Rec. function, press 5SEC.

REC 

2

 again so that 

 5S 

@

 disappears.

• Fade/Wipe (

 pg. 22) cannot be activated by

pressing 5SEC. REC 

2

.

Summary of Contents for GR-SX37ED

































Reviews: